Panasonic BT-LH2550P, BT-LH2550E manual TWO Window function

Page 41

Main Menu (continued)

TWO WINDOW function

The “TWO WINDOW” function displays two inputs selected from VIDEO, SDI1/2, YPBPR/RGB or DVI-D in two windows.

Each press of the button ([FUNCTION1] to [FUNCTION5]) (page 32) to which the "TWO WINDOW" function has been assigned changes the display mode.

(In the factory default setting, it is assigned to FUNCTION3.)

Press the FUNCTION button to which the TWO WINDOW function has been assigned.

Main window (normal window)

Main window: Displays input selected by “INPUT” in a single

window.

Video

Press the button again

Main window Sub-window

Video Video

Press the button again

Main window Sub-window

Still image

Video

Press the button again

Sub-window

Main window: Displays input selected by “INPUT.”

Sub-window: Displays input selected in the “SUB INPUT SEL.” submenu under the “DISPLAY SETUP” menu.

Change “GAMMA SELECT”, “COLOR SPACE”, “COLOR GAIN R” “G” “B” submenu settings in the “VIDEO CONFIG” menu to enable comparison with the main window (video).

Main window: Displays input selected by “INPUT” as a still life image.

Sub-window: Displays input selected in the “SUB INPUT SEL.” submenu under the “DISPLAY SETUP” menu.

Change “GAMMA SELECT”, “COLOR SPACE”, “COLOR GAIN R” “G” “B” submenu settings in the “VIDEO CONFIG” menu to enable comparison with the main window (still image).

Sub-window: Displays input selected in the “SUB INPUT SEL.” submenu under the “DISPLAY SETUP” menu in a single window.

Video

Press the button again

Note:

When the main window and sub-window input setting is “YPBPR/RGB” and “RGB-COMP,” the main window and sub-window are displayed in a single window. When the input settings for the main window and sub- window are both “DVI-COMP,” they are also displayed in a single window.

When the input signals selected in the main and sub-window differ, the color shade, etc. may differ slightly.

When the input signal terminals of video displayed in the main window and sub-window differ, the still image function does not work.

The main window is normally displayed on the left side.

When SDI1 or SDI2 is selected for the main window and sub-window, both windows will show the same screen.

41

Image 41
Contents BT-LH2550P BT-LH2550E This Equipment Must be Grounded Read this first ! for BT-LH2550PDeclaration of Conformity Read this first ! for BT-LH2550PDo not Remove Panel Covers by Unscrewing Them Read this first ! for BT-LH2550EThis Equipment Must be Earthed Operating precaution Transportation precautionsApparatus is compliant with Read this firstContents Precautions for UseStandard accessories Optional unitsOutline AC Adaptor DimensionsVideo monitor unit Power LED Front panel controls Power switchControls and Their Functions Front view Rear view Tally lamp page 35Front panel controls Adjust buttonInput button Menu buttonRear panel terminals Power lamp Power switch on , OFFAC Adapter AC in AC inletConnecting the power cord Power SupplyInput signal status How to Use the On Screen MenuPicture/volume adjusting menu Sharpness displayMenu display Function displayAudio level meter display Closed Caption CC display Time Code display TCEnter Menu operationsBright Light Backlight Volume Picture/volume adjusting menu operationsPhase Chroma Saving user data Loading user data User DataMain Menu Menu configurationMarker Sub menu Setting DescriptionMarker BACK*2GPI PRESET2*5 GPI PRESET1*5Marker TYPE*4*6 Cross HatchVista marker, Cnsco marker Marker typesArea marker Center markerMain Menu Video Config ANAMO*2*8 MONO*2SD ASPECT*2 SCAN*2Color TEMP.*1 ResetGain RED Gain GreenSystem Config RXD TXD DTR DSR GND RTS CTS Equipment required for calibrationRESET*2 Performing Auto Calibration Reset operationAuto CALIBRATION*1Function FunctionAuto Setup HV DelayGamma Select SD AspectBlue only AutosetupSUB Input SEL Audio Level MeterEnable DisableGPI GPI ControlInput Select Phase AUTOSETUP*1Clock WXGA/XGAAudio Display Setup Normal screen TWO Window function 1920 1280 640 960 TWO Window sizeMain window HD and sub-window SD DVI-COMP NtscPAL Hourmeter ControlList of setting restrictions available, × not available Chroma Bright Operating conditions Remote SpecificationsGPI terminal RS-232C terminal RS-232C remote control methodSetting command Command Description Data Response This command returns the sub-window setting Query commandError Display Maintenance inspecionsMaintenance Specifications SDI1 SDI2 YP BP R SpecifictionsMemo Panasonic Canada Inc