NEC NF2300-SE41E manual

Page 60

After the replacing disk drive is inserted to the end securely, push down the ejector opened upward to click for locking.

When inserting the disk drive into the disk enclosure, push it as far as it will go and then lock the ejector.

Incorrect insertion may cause malfunction.

(5)Inserting a new disk drive allows the data recovery to be started automatically.

If the auto repair feature is set to OFF, issue a recovery instruction from the management software in manual mode to start recovery. Otherwise, the reduced state ("reduce" shown as the logical disk status) remains.

Setting the auto repair feature to ON in recovery wait state does not start recovery. The setting is enabled starting with the next recovery.

(6)The additional disk enclosure and disk array unit operate normally during the data recovery. At the termination of the data recovery, the SERVICE LEDs on the array controller and additional disk enclosure go off.

- 46 -

Image 60

Contents NF2300-SE41E Additional Disk Enclosure Users Guide Page Safety Precautions Page Iii Indication on Safety Page Trademarks Preface Check of Components in Package NF2300-SE41E This Users Guide also uses the following symbol Contents Action Taken AT Occurrence of Fault or Error Page Environment in Use of Additional Disk Enclosure Installation and Connection of Additional Disk Enclosure Page Page Routine Inspection of Additional Disk Enclosure Features of Additional Disk Enclosure Names and Roles of Sections Disk Enclosure FrontPage Disk Enclosure Rear Power Supply for Disk Enclosure Page Adapter Diag Ready LEDPage Installation and Connection Procedures Installation and Connection ProceduresConnection of Additional Disk Enclosure Page Connection of Additional Disk Enclosure OFF Page Page 2 1 on When DE-DIAG ID = 0 When DE-DIAG ID = Sample configuration 1 NF2300-SR4xxE Sample configuration 2 NF2300-SR4xxE + NF2300-SP02E Connection of Power Cords Page Addition of Optional Devices Addition of Disk DriveInstallation procedure Page Page Location 00 in NF2300-SE41E Handling of Additional Disk Enclosure Power On/Off of Additional Disk Enclosure Power switches of disk enclosures Page Page Page Switches of array controller are turned off LD Logical Disk Setting Procedure Spare Disk Setting ProcedureAction Taken AT Occurrence of Fault or Error Additional Disk Enclosure Connection of Additional Disk Indication at Occurrence of Fault Fault of Disk Drive Location label Page Fault of Power Supply for Disk Enclosure Page Page Page Fault of Adapter Be careful that it is hotPage Page Check of Type Name and Manufacturing Numbers Service and Support Unit Life/Repair Service PeriodPreparation before Phone Call Disposal of Additional Disk EnclosureProduct Specification Basic Specification of Additional Disk EnclosureOptional Components Environmental Conditions of Additional Disk EnclosurePower Specification External Dimension and Weight of Additional Disk Enclosure