NEC manual Location 00 in NF2300-SE41E

Page 45

(4)Writing information on option label

To allow the options installed in the disk enclosure to be found by external view, the label indicating the options available for the installation is put on the additional disk enclosure.

If a disk drive is added, write down the last two digits of model number and a check mark at the corresponding field on the label to indicate the addition as shown in the figure below.

Write down a check mark as shown in the figure.

Enter the last two digits of model number ("13" in the example).

Note:	The figure above indicates that a single NF2300-SM413E is installed at
	location '00' in NF2300-SE41E.
	If NF2300-SM412E is added, enter the last two digits of model number ("12")
	in "NF2300-SM4 (E)" field. Write down a check mark at the location in
	which the disk drive is installed, which appears in the area to the right of the
	model number field.
	Similarly, if NF2300-SM413E or NF2300-SM422E is added, enter the last two
	digits of model number ("13" or "22") in "NF2300-SM4 (E)" field. Write
	down a check mark at the location in which the disk drive is installed, which
	appears in the area to the right of the model number field.
	If disk drives are installed at locations '00' and '01,' write down check marks
	at the '00' and '01' fields.

- 31 -

Image 45

Contents NF2300-SE41E Additional Disk Enclosure Users Guide Page Safety Precautions Page Iii Indication on Safety Page Trademarks Preface Check of Components in Package NF2300-SE41E This Users Guide also uses the following symbol Contents Action Taken AT Occurrence of Fault or Error Page Environment in Use of Additional Disk Enclosure Installation and Connection of Additional Disk Enclosure Page Page Routine Inspection of Additional Disk Enclosure Features of Additional Disk Enclosure Disk Enclosure Front Names and Roles of SectionsPage Disk Enclosure Rear Power Supply for Disk Enclosure Page Diag Ready LED AdapterPage Installation and Connection Procedures Installation and Connection ProceduresConnection of Additional Disk Enclosure Page Connection of Additional Disk Enclosure OFF Page Page 2 1 on When DE-DIAG ID = 0 When DE-DIAG ID = Sample configuration 1 NF2300-SR4xxE Sample configuration 2 NF2300-SR4xxE + NF2300-SP02E Connection of Power Cords Page Addition of Disk Drive Addition of Optional DevicesInstallation procedure Page Page Location 00 in NF2300-SE41E Handling of Additional Disk Enclosure Power On/Off of Additional Disk Enclosure Power switches of disk enclosures Page Page Page Switches of array controller are turned off Spare Disk Setting Procedure LD Logical Disk Setting ProcedureAction Taken AT Occurrence of Fault or Error Additional Disk Enclosure Connection of Additional Disk Indication at Occurrence of Fault Fault of Disk Drive Location label Page Fault of Power Supply for Disk Enclosure Page Page Page Be careful that it is hot Fault of AdapterPage Page Check of Type Name and Manufacturing Numbers Unit Life/Repair Service Period Service and SupportPreparation before Phone Call Disposal of Additional Disk EnclosureBasic Specification of Additional Disk Enclosure Product SpecificationOptional Components Environmental Conditions of Additional Disk EnclosureExternal Dimension and Weight of Additional Disk Enclosure Power Specification