NEC NF2300-SE41E manual

Page 35

(3)Connection between array controllers and additional disk enclosures

You need to install the additional control card (NF2300-SP02E) before connecting the additional disk enclosure with the array controller.

Push the connector at either end of the FC cable (HSSDC) into the FC connector (DEF2) for the disk enclosure of the array controller 0 (CONT0) until a click is heard. You can use the FC cable (HSSDC) provided with the additional disk enclosure or the FC cable (HSSDC) of the separately priced DE cable (NF9120-SJ04E). The FC cable has the same connectors at both ends. Either connector may be connected to the controller.

Push the connector at the other end of the FC cable (HSSDC) into the FC-IN connector on adapter 0 (ADP0) of the additional disk enclosure until a click is heard.

Similarly, connect the FC connector (DEF3) for the disk enclosure on the additional control card installed on the other controller (CONT1) of the disk array unit to the FC-IN connector on adapter 1 (ADP1) of the additional disk enclosure.

Do not connect any cable/connector to the DEF3 connector of additional control card installed on controller 0 (CONT0) or DEF2 connector of the additional control card installed on controller 1 (CONT1).

Subsequently, use the DE diagnosis cable provided with the additional disk enclosure or the DE diagnosis cable of the separately priced DE cable (NF9120-SJ04E). Push the connector at either end of the DE diagnosis cable into the DE-DIAG connector [PORT1] on adapter 0 (ADP0) of the existing disk enclosure until a click is heard. The DE diagnosis cable has the same connectors at both ends. Either connector may be connected to the adapter of the existing disk enclosure.

Push the connector at the other end of the DE diagnosis cable into the DE-DIAG connector [PORT0] on adapter 0 (ADP0) of the additional disk enclosure until a click is heard.

Similarly, connect the DE-DIAG connector [PORT1] on adapter 1 (ADP1) of the existing disk enclosure to the DE-DIAG connector [PORT0] on adapter 1 (ADP1) of the additional disk enclosure.

- 21 -

Image 35
Contents NF2300-SE41E Additional Disk Enclosure Users Guide Page Safety Precautions Page Iii Indication on Safety Page Trademarks Preface Check of Components in Package NF2300-SE41E This Users Guide also uses the following symbol Contents Action Taken AT Occurrence of Fault or Error Page Environment in Use of Additional Disk Enclosure Installation and Connection of Additional Disk Enclosure Page Page Routine Inspection of Additional Disk Enclosure Features of Additional Disk Enclosure Disk Enclosure Front Names and Roles of SectionsPage Disk Enclosure Rear Power Supply for Disk Enclosure Page Diag Ready LED AdapterPage Installation and Connection Procedures Installation and Connection ProceduresConnection of Additional Disk Enclosure Page Connection of Additional Disk Enclosure OFF Page Page 2 1 on When DE-DIAG ID = 0 When DE-DIAG ID = Sample configuration 1 NF2300-SR4xxE Sample configuration 2 NF2300-SR4xxE + NF2300-SP02E Connection of Power Cords Page Addition of Disk Drive Addition of Optional DevicesInstallation procedure Page Page Location 00 in NF2300-SE41E Handling of Additional Disk Enclosure Power On/Off of Additional Disk Enclosure Power switches of disk enclosures Page Page Page Switches of array controller are turned off Spare Disk Setting Procedure LD Logical Disk Setting ProcedureAction Taken AT Occurrence of Fault or Error Additional Disk Enclosure Connection of Additional Disk Indication at Occurrence of Fault Fault of Disk Drive Location label Page Fault of Power Supply for Disk Enclosure Page Page Page Be careful that it is hot Fault of AdapterPage Page Check of Type Name and Manufacturing Numbers Disposal of Additional Disk Enclosure Service and SupportUnit Life/Repair Service Period Preparation before Phone CallEnvironmental Conditions of Additional Disk Enclosure Product SpecificationBasic Specification of Additional Disk Enclosure Optional ComponentsExternal Dimension and Weight of Additional Disk Enclosure Power Specification