NEC NF2300-SE41E manual Addition of Optional Devices, Addition of Disk Drive

Page 41

6.ADDITION OF OPTIONAL DEVICES

6.1Addition of Disk Drive

CAUTION

Do not store the product in an area where the temperature may increase extremely or the difference between the warm and cold states is considerably large. In addition, do not store the product in an area with much moisture or dust.

Note that foreign substances such as water and metal may not be entered into the product during storage. Failure to follow it may cause device failure, electric shock, and/or fire to occur.

Keep the product into the package during storage or shipment.

The additional disk enclosure is not normally equipped with disk drives. Before using the additional disk enclosure, install disk drives sold separately in the additional disk enclosure. (The additional disk enclosure can be equipped with up to 15 disk drives.

Product name

Part number

Capacity

Additional disk drive

NF2300-SM412E

36GB / 10,000 rpm

Additional disk drive

NF2300-SM413E

73GB / 10,000 rpm

Additional disk drive

NF2300-SM414E

147GB / 10,000 rpm

Additional disk drive

NF2300-SM422E

36GB / 15,000 rpm

If an additional disk drive and standard disk drive are reassigned to the same logical disk, all the current data is initialized.

Be sure to make backup copies of necessary data before performing the addition procedure.

To use additional disk drives for expansion, install them sequentially from left to right of the disk enclosure.

An additional disk drive can also be used as a disk drive for a spare disk. In this case, be sure to install the additional disk drive in slot 14 of the disk enclosure. If slot 14 already contains a disk drive for a spare disk, install the additional disk drive in slot 13.

- 27 -

Page 40 Page 42
Image 41
Page 40 Page 42
Contents NF2300-SE41E Additional Disk Enclosure Users Guide Page Safety Precautions Page Iii Indication on Safety Page Trademarks Preface Check of Components in Package NF2300-SE41E This Users Guide also uses the following symbol Contents Action Taken AT Occurrence of Fault or Error Page Environment in Use of Additional Disk Enclosure Installation and Connection of Additional Disk Enclosure Page Page Routine Inspection of Additional Disk Enclosure Features of Additional Disk Enclosure Disk Enclosure Front Names and Roles of SectionsPage Disk Enclosure Rear Power Supply for Disk Enclosure Page Diag Ready LED AdapterPage Installation and Connection Procedures Installation and Connection ProceduresConnection of Additional Disk Enclosure Page Connection of Additional Disk Enclosure OFF Page Page 2 1 on When DE-DIAG ID = 0 When DE-DIAG ID = Sample configuration 1 NF2300-SR4xxE Sample configuration 2 NF2300-SR4xxE + NF2300-SP02E Connection of Power Cords Page Addition of Disk Drive Addition of Optional DevicesInstallation procedure Page Page Location 00 in NF2300-SE41E Handling of Additional Disk Enclosure Power On/Off of Additional Disk Enclosure Power switches of disk enclosures Page Page Page Switches of array controller are turned off Spare Disk Setting Procedure LD Logical Disk Setting ProcedureAction Taken AT Occurrence of Fault or Error Additional Disk Enclosure Connection of Additional Disk Indication at Occurrence of Fault Fault of Disk Drive Location label Page Fault of Power Supply for Disk Enclosure Page Page Page Be careful that it is hot Fault of AdapterPage Page Check of Type Name and Manufacturing Numbers Unit Life/Repair Service Period Service and SupportPreparation before Phone Call Disposal of Additional Disk EnclosureBasic Specification of Additional Disk Enclosure Product SpecificationOptional Components Environmental Conditions of Additional Disk EnclosureExternal Dimension and Weight of Additional Disk Enclosure Power Specification
Top Page Image Contents