Button I
The door locking and unlocking functions are controlled by pressing 
.
Button II
Timer Mode is controlled by 
.
Button I and II
The remote start function of your system is controlled by
pressing 
and 
simultaneously.
transmitter/receiver learn routine
The system comes with one transmitter that has been taught to the receiver. The receiver can store up to 4 different transmitter codes in memory. Use the following learn routine to add trans- mitters to the system or to change button assignments if desired.
The Program switch, plugged into the blue port, is used for programming. There is a basic sequence of steps to remember whenever programming this unit: Key, Choose, Transmit and Release.
1. Key. Turn the ignition to the ON position.
28 | © 2002 directed electronics, inc . |