Program switch. Press it one time and release it to advance from Channel One to Channel Two. Now, press and hold the Program switch. The LED will flash two times. As before, do not release it.
If you want to program Channel Three after programming Channel One, release the Program switch, press it twice and release it to advance to Channel Three. Then press it once more and hold it. The LED will flash three times to confirm it is ready to receive the code from the transmitter.
Learn Routine will be exited if:
➤Ignition is turned off.
➤Program switch is pressed too many times.
➤More than 25 seconds elapses between programming steps.
using your system
➜
locking/arming
Pressing 
for one second will lock the doors. The parking lights will flash once to confirm that the doors are locked.
note: Power door lock control is an optional feature. Extra parts and labor may be necessary for your system to interface with your vehicle’s power door locks.
30 | © 2002 directed electronics, inc . |