Directed Electronics 259D manual Lock/Unlock Timer Mode Remote Start

Page 32

2. Choose. Within 10 seconds, press and release the Program switch the number of times corresponding to the desired channel listed below. Once you have selected the channel, press the switch once more and hold it. The LED will flash to confirm the selected channel. Do not release the Program switch.

 

Channel number

Function

 

 

1

Lock/Unlock

 

 

 

 

 

 

2

Timer Mode

 

 

 

 

 

 

3

Remote Start

 

 

 

 

 

3.Transmit. While holding the Program switch, press the button on the transmitter

that you would like to control the selected receiver channel.

4. Release. Once the code is learned, the Program switch can be released.

You can advance from programming one channel to another by releasing the Program switch and tapping it to advance steps and then holding it. For instance: You have programmed Channel One and you want to program Channel Two. Release the

© 2002 directed electronics, inc .

29

Page 31 Page 33
Image 32
Page 31 Page 33
Contents 259D Limited lifetime consumer warranty Important Note Table of contents What is included Installation toolsSystem maintenance Important informationYour warranty Fcc/id noticeDirected electronics, inc Directed electronics, inc Secondary harness H/2, 6-pin connector Primary harness H/1, 8-pin connectorRelay satellite ribbon harness H/3, 5-pin connector Relay satellite thick gauge wiresInstallation Step Constant Power and Ignition wires Meter, turn the key to the crank position and the voltage Accessory and Starter wires Directed electronics, inc Safety Shutdown Wires Directed electronics, inc Directed electronics, inc Directed electronics, inc Parking light flash Door locks Engine monitoring Directed electronics, inc Directed electronics, inc Factory Alarm/Disarm Immobilizer Bypass Modules Testing the system Standard configuration Transmitter functionsTransmitter/receiver learn routine Lock/Unlock Timer Mode Remote Start Using your system Locking/armingRemote start Unlocking/disarmingIgnition-controlled door locks Step on the brake pedal, or Press and for one second Timer mode Valet take-over Features menu Programming options TroubleshootingRapid resume logic Directed electronics, inc Directed electronics, inc Directed electronics, inc Glossary of terms Security & convenience expansions Wiring quick reference guide Directed electronics, inc Directed electronics, inc Quick Reference Guide Company behind this system is Directed Electronics, Inc
Top Page Image Contents