➜
timer mode
Timer Mode automatically starts the engine and runs it for a
important! This feature must only be used in open areas, never in an enclosed area such as a garage.
To enter Timer Mode:
1.Start the vehicle by pressing and releasing 
and 
.
2.Press and release 
.
3.Within two seconds press and release 
and 
again.
The engine will shut down and the parking lights will flash four times. The engine will then restart to confirm that Timer Mode has been entered.
The engine may be allowed to run for its preset time or can be
shut down by pressing Buttons 
and 
again. Either way, it will restart every three hours for a total of six cycles. If the unit receives a shutdown input while operating in the timer mode the engine will stop, but will restart, on schedule, again in three hours.
To exit Timer Mode:
Timer Mode can be exited by turning the ignition on with the key any time the engine is not running. You can also exit Timer Mode manually from the transmitter by following these steps:
© 2002 directed electronics, inc . | 33 |