Directed Electronics 259D manual Features menu

Page 38

features menu

The factory settings are indicated in bold text in the table below.

Feature

LED On Setting

LED Off Setting

 

Number

(press channel 1)

(press channel 2)

 

 

1

Engine checking on

Engine checking off

 

2

Tachometer

Voltage checking type

 

 

 

checking type

 

 

 

 

 

 

 

3

12 minutes

24 minutes (2) run time

 

 

 

run time (1)

 

 

4

Flashing parking

Constant parking light

 

 

 

light output

output

 

 

 

 

 

 

5

Cranking time

Cranking time 0.8 (2), 1.0

 

 

 

0.6 sec. (1)

(3), 1.2 (4), 1.4 (5),

 

 

 

 

1.6 (6), 1.8 (7), 2.0 (8), 4.0

 

 

 

 

(9) sec.

 

 

 

 

 

 

6

High voltage

Low voltage check level

 

 

 

check level

 

 

 

 

 

 

 

7

Auxiliary output:

Auxiliary output:

 

 

 

factory alarm disarm

special accessory

 

8

Normal status output

Factory re-arm output

 

 

 

 

 

 

10

Ignition-controlled

Ignition-controlled

 

 

 

locking on

locking off

 

11

Ignition-controlled

Ignition-controlled

 

 

 

unlocking on

unlocking off

 

 

 

 

 

 

note: The number in parentheses indicate the number of times the LED will flash.

© 2002 directed electronics, inc .

35

Image 38
Contents 259D Limited lifetime consumer warranty Important Note Table of contents What is included Installation toolsSystem maintenance Important informationYour warranty Fcc/id noticeDirected electronics, inc Directed electronics, inc Secondary harness H/2, 6-pin connector Primary harness H/1, 8-pin connectorRelay satellite ribbon harness H/3, 5-pin connector Relay satellite thick gauge wiresInstallation Step Constant Power and Ignition wires Meter, turn the key to the crank position and the voltage Accessory and Starter wires Directed electronics, inc Safety Shutdown Wires Directed electronics, inc Directed electronics, inc Directed electronics, inc Parking light flash Door locks Engine monitoring Directed electronics, inc Directed electronics, inc Factory Alarm/Disarm Immobilizer Bypass Modules Testing the system Standard configuration Transmitter functionsTransmitter/receiver learn routine Lock/Unlock Timer Mode Remote Start Using your system Locking/armingRemote start Unlocking/disarmingIgnition-controlled door locks Step on the brake pedal, or Press and for one second Timer mode Valet take-over Features menu Programming options TroubleshootingRapid resume logic Directed electronics, inc Directed electronics, inc Directed electronics, inc Glossary of terms Security & convenience expansions Wiring quick reference guide Directed electronics, inc Directed electronics, inc Quick Reference Guide Company behind this system is Directed Electronics, Inc