Wolf Appliance Company DCL-200FD Connecting Video Equipment, ProScaler DVD player or DTV decoder

Page 15

ProScalerHigh Definition Video Processor User’s Manual

Connecting Video Equipment

Using an S-Video or a Composite Video Cable

Using an S-Video or a Composite Video cable, a VCR, laser disc player or other video equipment can be connected to the labeled input terminals.

S-Video cable (commercially available) Composite video cable (commercially available)

Note: The S-VIDEO terminal uses a video signal system in which the picture is separated into color and luminance signals to realize a higher-quality image. To view a higher-quality image, use a commercially available S-Video cable to connect the INPUT 3 terminal on the projector and the S-Video output terminal on the video equipment.

Connecting to Component Video Equipment Using a Component Cable

Use a component cable (commercially available) when connecting to the COMPONENT INPUT terminals, using component video equipment such as DVD players and DTV* decoders. Connect using analog component output terminals.

*DTV is the umbrella term used to describe the new digital television system in the United States.

The component jack for a DVD and so forth may be indicated with Y,CB or CR. Connect each jack as shown right.

ProScaler	Y	B-Y	R-Y
DVD player or	Y	PB	PR
DTV decoder	Y/G	CB	CR

Note: When connecting the projector to the video equipment in this way, select Component for Input Source in the ProScaler

MENU.

Connecting Video Components with an

HDMI to HDMI Cable

Use an HDMI to HDMI cable (supplied accessory) when connecting HDMI video equipment such as Blu-ray players, DVD players and more to the six available inputs.

HDMI Inputs #1 through #5 are located on the rear pannel of the ProScaler.

HDMI input #6 is under the removable

WOLF CINEMA logo plate on the panel front.

Note: Select the signal output type from the video equipment set up menu

14

Image 15

Contents ProScaler Copyright 2010 Wolf Cinema PrefaceProScalerHigh Definition Video Processor User’s Manual ProScaler ContentsRemote Control Advanced FunctionsDevice Codes Introduction Wolf Cinema’s ProScaler Basic FeaturesVideo Flexible Component Video InputsOther Rear Panel Connectors Not used Service ResetHdmi Setup Before Setting UpSupplied Accessories Power cords Cable Types Menu Button Press to enable on-screen System Remote Control Key ProScaler FunctionsConnect Hdmi cable from ProScaler to Projector Connecting the Projector and ProScalerProScaler IR Remote control ProScalerAim Remote atFor 2 seconds to turn Remote at the ProjectorProScaler DVD player or DTV decoder Connecting Video EquipmentUsing an S-Video or a Composite Video Cable Connecting Video Components with an Hdmi to Hdmi CablePlug and Play Functions PC Connecting a ComputerMenus and User Interface Remote & MenusPicture Controls Menu OrganizationZoom Control Screen Select InputInput Select Selection Zoom and PanZoom using the Remote Control Aspect Ratio Control using Menus or RemotePicture Controls Hue Brightness ControlContrast Control Color SaturationScaler Main Menu Picture Controls ProScaler Enhancement Detail EnhancementScaler Main Menu Picture Controls Detail Enhancement ProScaler EnhancementInput Priority Settings MenuScaler Main Menu Settings Output Format Output FormatRename Inputs Output Connector ConditionsSelect Audio Output Associate Audio and Video InputsGame Mode Factory DefaultsScaler Main Menu Settings Factory Defaults Wolf Cinema’s ProScaler Universal Remote Remote ControlPunch Through ModesProgramming the remote with the preprogrammed code MacrosProgramming a Second DVD, etc. to Other Device Buttons Press the DVD button to program the DVDs Setup Code numbersProgramming the remote with Learning Method To Erase a Learned Command From a ButtonPress one of the Macro buttons To Erase All the Learned Commands in One Device ModePress the Play button. The Device LED will blink one time Erasing the Macro CommandsFactory Reset Test Patterns Advanced FunctionsProScalerHigh Definition Video Processor User’s Manual Deinterlacer Bias Controls Auto Wake UpAuto Standby Hot Plug Source Component InputAV Receivers and Audio Processors Device Codes238 124137 139 052 165 115 004 086 164 152Blu-ray & HD DVD CD Players Video Cassette Recorders VCR 066 070 145 083 133 140 157 163 074 012 023 039 043053 025070 012 034 039072 056 048 101 034 153AUX PC & iPod AUX Media PCAUX Lighting 112 072 251 161247 197 146 248 473 474466 177400 187043 197 143 230457 530004 112 058 143 171 172 070Default 139 147 126 185 085 213 277323 328 353 354 356 457 494 144 160 161 165Cable Boxes 030 111020 030 074 103Satellite Boxes 091 281098 087 111035 107021 042 138 144 001 083 095 105DVD-TV/DVD Combos DVD RecordersDVD-DVD/VCR Combos Wolf Cinema