Wolf Appliance Company DCL-200FD manual Programming the remote with Learning Method

Page 30

ProScaler

Step 2] Press the INFO button.

The Device LED will blink number of times indicating the number of each digit of the Setup Code number. Each digit is separated by 1 second interval of the LED being turned off.

For example: One blink, three blinks and eight blinks indicate the code number 138.

Tip: Ten blinks are equal to the number “0”.

2 Programming the remote with Learning Method

All buttons in 7 Device modes can learn except the LIGHT button.

-. Learning available carrier frequency is from 15KHz to 480KHz.

-. Learned functions override any existing preprogrammed functions on the remote control.

-. Learned functions are automatically erased when a new function is learned on the same button.

-. Learned functions are retained even after a different Setup Code number is programmed into the remote control.

-. To return to an original preprogrammed function, a learned functioned should be erased.

A. Learning a New Command

Step 1] Press the Source Device Input button and the ENT buttons simultaneously and hold for 3 seconds until the Device LED turns on. (The LED will stay on for 20 seconds. The next step must be entered during this period).

Step 2] On the remote control, press the button that is to be taught the new command. (The Device LED will blink one time).

Step 3] On the original remote control, press and hold the button for the command to be learned until the Device LED blinks twice.

Tip: The LED will flash 5 times if there is error in process of learning. Please repeat Step 2 and Step 3. Repeat Step 2 and Step 3 for any other buttons to be taught in the Device mode selected in Step 1.

Step 4] Once you have completed learning new commands to buttons in the selected Device mode, press and hold the Source Device Input button and ENT button simultaneously to save learned functions. The Source Device Input button LED will blink three times to confirm the programming.

Please repeat for any other Device modes starting from Step 1.

B. To Erase a Learned Command From a Button

Step 1] Press the Source Device Input button and the ENT buttons simultaneously and hold for 3 seconds until the Device LED turns on. (The LED will stay on for 20 seconds. The next step must be entered during this period).

Step 2] On the remote control, press the button that is to be erased for 3 seconds. (The Device button LED will blink twice to confirm it).

Repeat Step 2 for any other buttons to be erased in the selected Device mode.

Step 3] To exit this feature, press and hold the Device button and the ENT button simultaneously, once again. (The LED will blink three times).

29

Image 30

Contents ProScaler Preface Copyright 2010 Wolf CinemaProScalerHigh Definition Video Processor User’s Manual Contents ProScalerRemote Control Advanced FunctionsDevice Codes Wolf Cinema’s ProScaler Basic Features IntroductionFlexible Component Video Inputs VideoOther Rear Panel Connectors Not used Service ResetHdmi Setup Before Setting UpSupplied Accessories Power cords Cable Types System Remote Control Key ProScaler Functions Menu Button Press to enable on-screenConnecting the Projector and ProScaler Connect Hdmi cable from ProScaler to ProjectorRemote at Remote control ProScalerAim ProScaler IRRemote at the Projector For 2 seconds to turnConnecting Video Components with an Hdmi to Hdmi Cable Connecting Video EquipmentUsing an S-Video or a Composite Video Cable ProScaler DVD player or DTV decoderConnecting a Computer Plug and Play Functions PCRemote & Menus Menus and User InterfaceMenu Organization Picture ControlsZoom and Pan Select InputInput Select Selection Zoom Control ScreenZoom using the Remote Control Aspect Ratio Control using Menus or RemotePicture Controls Color Saturation Brightness ControlContrast Control HueProScaler Enhancement Detail EnhancementScaler Main Menu Picture Controls Detail Enhancement Scaler Main Menu Picture Controls ProScaler EnhancementOutput Format Settings MenuScaler Main Menu Settings Output Format Input PriorityAssociate Audio and Video Inputs Output Connector ConditionsSelect Audio Output Rename InputsGame Mode Factory DefaultsScaler Main Menu Settings Factory Defaults Remote Control Wolf Cinema’s ProScaler Universal RemoteModes Punch ThroughMacros Programming the remote with the preprogrammed codePress the DVD button to program the DVDs Setup Code numbers Programming a Second DVD, etc. to Other Device ButtonsTo Erase a Learned Command From a Button Programming the remote with Learning MethodTo Erase All the Learned Commands in One Device Mode Press one of the Macro buttonsErasing the Macro Commands Press the Play button. The Device LED will blink one timeFactory Reset Advanced Functions Test PatternsProScalerHigh Definition Video Processor User’s Manual Deinterlacer Bias Controls Auto Wake UpAuto Standby Component Input Hot Plug SourceDevice Codes AV Receivers and Audio Processors086 164 152 124137 139 052 165 115 004 238Blu-ray & HD DVD CD Players Video Cassette Recorders VCR 025 012 023 039 043053 066 070 145 083 133 140 157 163 074153 012 034 039072 056 048 101 034 070AUX PC & iPod AUX Media PCAUX Lighting 197 146 248 473 474 072 251 161247 112187 177400 466530 230457 043 197 143144 160 161 165 070Default 139 147 126 185 085 213 277323 328 353 354 356 457 494 004 112 058 143 171 172Cable Boxes 074 103 111020 030 030Satellite Boxes 087 111 281098 091001 083 095 105 107021 042 138 144 035DVD Recorders DVD-TV/DVD CombosDVD-DVD/VCR Combos Wolf Cinema