ProScalerHigh Definition Video Processor User’s Manual
Connectivity
Component Video Inputs
Composite Video
HDMI
HDMI Video/Audio Output
HDMI Audio Outpute
AC Input
IR - In
Service
Reset
Flexible Component Video Inputs
This group of connectors can accept 3 types of analog component video inputs:
Component (YPbPr) (2 Inputs)
This is the most common type of component analog signal. Cables are usually 3
RGBHV
RGBHV stands for “Red, Green, Blue, Horizontal Sync, Vertical Sync”.
It is commonlyy used to connect a computer’s analog VGA output using the VGA to RGBHV adapter cable.
The Wolf Cinema ProScaler can accept these formats via RGBHV:
VGA | 640 x 480 @ 60 Hz |
SVGA | 800 x 600 @ 60 Hz |
XGA | 1024 x 768 @ 60 Hz |
SXGA | 1280 x 1024 @ 60 Hz |
RGB + CVBS
For use with a SCART breakout cable. SCART is primarily a European connector type. CVBS means Composite Video Broadcast Signal; typically this would be an analog PAL or SECAM signal. Connect the breakout cable to a SCART connector, then connect Red, Green and Blue to the component inputs, then connect CVBS to the Sync input horizontally adjacent to the component inputs.
Video Input (yellow RCA connector)
Composite video input. This signal is also known as “base band NTSC” and accepts European analog standards PAL and SECAM.
S-Video
6