ProScalerHigh Definition Video Processor User’s Manual
Main Menu
Select Input
Scaler
Input Select Selection
There are 2 ways to select source components (inputs):
1Switch inputs using the Select Input Menu, or
2Select first the SCALER button and then access the desired input using the numeric keypad.
Zoom and Pan
Scaler
The Zoom control allows you to magnify your picture. As the picture magnifies, the area around the ProScalers becomes invisible [shifting off the sides, top, and bottom of your display].
Pan lets you to move around on a zoomed picture. You can shift left, right, up or down. Shift has no effect unless the picture is zoomed. If the picture is not zoomed, the Pan control will be grayed, meaning it is unavailable.
The Zoom and Pan settings you choose apply only to the current input. You can customize the zoom settings for every input if you so choose. Zoom and Shift settings will be stored and will not change until you deliberately change them.
Zoom Control Screen
Scaler
Independent Horizontal and Vertical Zoom
Scaler
Zoom H or V gives you independent horizontal and vertical zoom control. The original aspect ratio is not maintained using this control.
The Zoom H or V control works differently from most other control screens. It uses Up/Down arrows to zoom vertically, and Left/Right arrows to zoom horizontally. The OK button takes you to the previous screen, or you can press the EXIT button your remote to exit menus.
18