Hdmi, Not used Service Reset | Wolf Appliance Company DCL-200FD

Wolf Appliance Company DCL-200FD manual Hdmi, Other Rear Panel Connectors, Not used Service Reset

Page 8

ProScaler

HDMI 1.3

ProScaler has a total of 6 HDMI inputs, version 1.3. Five inputs are on the rear panel, and one HDMI inputs is located on the front of the unit, just under the removable Wolf Cinema logo plate. HDMI carries both video and audio signals.

Note: HDMI is compatible with DVI using an HDMI to DVI adapter cable.

DVI connectors do not carry the audio signal stream, as do HDMI interconnections.

HDMI Video/Audio Output

This connector is used to send all video signals to your Wolf Cinema projector.

HDMI Audio Output

This connector is intended to connect to an AV Receiver or Surround Sound Processor. The ProScaler will automatically sent audio via this connector if it is connected to a powered-up AV Receiver, or you can manually configure ProScaler’s audio output. This HDMI connector does not output video.

Other Rear Panel Connectors

RS-232

Connect any 9-pin RS-232 cables from your external home automation or control system.

GPIO

Not used.

Service

This connector is used for system software upgrades, using a mini-USB cable. Refer to our web site: www.wolfcinema.com for any recent software updates.

Reset

This resets the ProScaler, if needed, bringing it back into a predefined operating condition. Reset initially does not change your settings. If Reset is desired but you wish to retain settings, it should be pressed and released quickly

(less than 2 seconds).

The reset button will also restore the factory defaults. If the reset button is pressed and held, the front panel LED will blink for about 5 seconds. When it stops blinking and stays on, the reset button can be released. All factory defaults will have been restored, and any user settings will be erased.

IR - In

This connecter can be used in installations where line-of-sight IR reception is not possible. You will need certain accessories that allow for remote IR connections.

AC Input

Power connection for your ProScaler.

Image 8

Contents

ProScaler Preface Copyright 2010 Wolf CinemaProScalerHigh Definition Video Processor User’s Manual Contents ProScalerDevice Codes Remote ControlAdvanced Functions Wolf Cinema’s ProScaler Basic Features IntroductionFlexible Component Video Inputs VideoHdmi Other Rear Panel ConnectorsNot used Service Reset Supplied Accessories Power cords SetupBefore Setting Up Cable Types System Remote Control Key ProScaler Functions Menu Button Press to enable on-screenConnecting the Projector and ProScaler Connect Hdmi cable from ProScaler to ProjectorRemote control ProScaler AimRemote at ProScaler IRRemote at the Projector For 2 seconds to turnConnecting Video Equipment Using an S-Video or a Composite Video CableConnecting Video Components with an Hdmi to Hdmi Cable ProScaler DVD player or DTV decoderConnecting a Computer Plug and Play Functions PCRemote & Menus Menus and User InterfaceMenu Organization Picture ControlsSelect Input Input Select SelectionZoom and Pan Zoom Control ScreenPicture Controls Zoom using the Remote ControlAspect Ratio Control using Menus or Remote Brightness Control Contrast ControlColor Saturation HueDetail Enhancement Scaler Main Menu Picture Controls Detail EnhancementProScaler Enhancement Scaler Main Menu Picture Controls ProScaler EnhancementSettings Menu Scaler Main Menu Settings Output FormatOutput Format Input PriorityOutput Connector Conditions Select Audio OutputAssociate Audio and Video Inputs Rename InputsScaler Main Menu Settings Factory Defaults Game ModeFactory Defaults Remote Control Wolf Cinema’s ProScaler Universal RemoteModes Punch ThroughMacros Programming the remote with the preprogrammed codePress the DVD button to program the DVDs Setup Code numbers Programming a Second DVD, etc. to Other Device ButtonsTo Erase a Learned Command From a Button Programming the remote with Learning MethodTo Erase All the Learned Commands in One Device Mode Press one of the Macro buttonsErasing the Macro Commands Press the Play button. The Device LED will blink one timeFactory Reset Advanced Functions Test PatternsProScalerHigh Definition Video Processor User’s Manual Auto Standby Deinterlacer Bias ControlsAuto Wake Up Component Input Hot Plug SourceDevice Codes AV Receivers and Audio Processors124 137 139 052 165 115 004086 164 152 238Blu-ray & HD DVD CD Players Video Cassette Recorders VCR 012 023 039 043 053025 066 070 145 083 133 140 157 163 074012 034 039 072 056 048 101 034153 070AUX Lighting AUX PC & iPodAUX Media PC 072 251 161 247197 146 248 473 474 112177 400187 466230 457530 043 197 143070Default 139 147 126 185 085 213 277 323 328 353 354 356 457 494144 160 161 165 004 112 058 143 171 172Cable Boxes 111 020 030074 103 030Satellite Boxes 281 098087 111 091107 021 042 138 144001 083 095 105 035DVD Recorders DVD-TV/DVD CombosDVD-DVD/VCR Combos Wolf Cinema

Related manuals

Wolf Appliance Company DCL-200FD manual Hdmi, Other Rear Panel Connectors, Not used Service Reset