Wolf Appliance Company DCL-200FD manual Programming a Second DVD, etc. to Other Device Buttons

Page 29

ProScalerHigh Definition Video Processor User’s Manual

B. Using Auto Search Method

Step 1] Turn on the Device you want to operate manually.

Step 2] Press the Source Device Input button and the OK buttons simultaneously and hold for 3 seconds until the Device LED turns on. (The LED will stay on for 20 seconds. The next step must be entered during this period).

Step 3] Point the remote control toward the Device and press the Cursor + (or Cursor -) button one at a time (or keep it at pressed) until turn of the Device.

Tip: Each the Cursor + (or Cursor -) button sends the Power signal of one Setup Code number.

Tip: Once the Device turns off, you are able to test other functions by pressing the buttons except the Device, Cursor+/-, Number 0-9 and Light buttons. Power On, Off, MUTE and Volume and Channel number buttons (0-9). (The Device button LED will blink once for each button pressed).

Step 4] Once your Device turns off, press the Source Device Input button selected in the Step 2 once again to store the Setup Code number. (The Device LED will blink three times to confirm that the code has been stored).

Step 5] Repeat the above steps to program the remote control for each of other Devices.

Tip: You are able to go back to the Using Three Digit Code Method mode by pressing the Channel number buttons (0-9) the OK button in the Step 3.

Tip: If you are still missing the Setup Code numbers to control any of your devices, use the Learning Method on the next page.

C. Programming a Second DVD, etc. to Other Device Buttons

This feature is used to program the remote control for two or more DVDs, etc., or to program a device into other device buttons. You can program the Setup Code number for any Device into any other unused Source Device Input button.

Example: If you have two DVD players. First, using the DVD button, program the remote via standard setup to operate the first DVD player. Then, program your second DVD into a Source Device Input button that is not being used, e.g., AUX using this method.

Step 1] Turn on the DVD player manually.

Step 2] Press the AUX button and the OK buttons simultaneously and hold for 3 seconds until the AUX LED turns on. (The AUX device LED will stay on for 20 seconds. The next step must be entered during this period).

Step 3] Press the DVD button to program the DVD's Setup Code numbers.

Step 4] Point the remote control toward the DVD player and press in the first three-digit Setup Code number for that Device using the number buttons(0-9) on the remote control. (The DVD Device LED will blink once for each button pressed).

Tip: Your DVD player will turn off when the corrected Setup code number has been selected. If the DVD does not turn off, press in the next Setup Code numbers until your DVD turns off.

Step 5] Once your Device turns off, press the AUX button once again to store the Setup Code number. (The AUX Device LED will blink three times to confirm that the code has been stored).

D. Finding the Setup Code number that was stored in the Device

Step 1] Press the Source Device Input button you wish to verify and the OK buttons simultaneously and hold for 3 seconds until the Device LED turns on. (The LED will stay on for 20 seconds. The next step must be entered during this period).

28

Page 28 Page 30
Image 29
Page 28 Page 30
Contents ProScaler Copyright 2010 Wolf Cinema PrefaceProScalerHigh Definition Video Processor User’s Manual ProScaler ContentsDevice Codes Remote ControlAdvanced Functions Introduction Wolf Cinema’s ProScaler Basic FeaturesVideo Flexible Component Video InputsHdmi Other Rear Panel ConnectorsNot used Service Reset Supplied Accessories Power cords SetupBefore Setting Up Cable Types Menu Button Press to enable on-screen System Remote Control Key ProScaler FunctionsConnect Hdmi cable from ProScaler to Projector Connecting the Projector and ProScalerAim Remote control ProScalerRemote at ProScaler IRFor 2 seconds to turn Remote at the ProjectorUsing an S-Video or a Composite Video Cable Connecting Video EquipmentConnecting Video Components with an Hdmi to Hdmi Cable ProScaler DVD player or DTV decoderPlug and Play Functions PC Connecting a ComputerMenus and User Interface Remote & MenusPicture Controls Menu OrganizationInput Select Selection Select InputZoom and Pan Zoom Control ScreenPicture Controls Zoom using the Remote ControlAspect Ratio Control using Menus or Remote Contrast Control Brightness ControlColor Saturation HueScaler Main Menu Picture Controls Detail Enhancement Detail EnhancementProScaler Enhancement Scaler Main Menu Picture Controls ProScaler EnhancementScaler Main Menu Settings Output Format Settings MenuOutput Format Input PrioritySelect Audio Output Output Connector ConditionsAssociate Audio and Video Inputs Rename InputsScaler Main Menu Settings Factory Defaults Game ModeFactory Defaults Wolf Cinema’s ProScaler Universal Remote Remote ControlPunch Through ModesProgramming the remote with the preprogrammed code MacrosProgramming a Second DVD, etc. to Other Device Buttons Press the DVD button to program the DVDs Setup Code numbersProgramming the remote with Learning Method To Erase a Learned Command From a ButtonPress one of the Macro buttons To Erase All the Learned Commands in One Device ModePress the Play button. The Device LED will blink one time Erasing the Macro CommandsFactory Reset Test Patterns Advanced FunctionsProScalerHigh Definition Video Processor User’s Manual Auto Standby Deinterlacer Bias ControlsAuto Wake Up Hot Plug Source Component InputAV Receivers and Audio Processors Device Codes137 139 052 165 115 004 124086 164 152 238Blu-ray & HD DVD CD Players Video Cassette Recorders VCR 053 012 023 039 043025 066 070 145 083 133 140 157 163 074072 056 048 101 034 012 034 039153 070AUX Lighting AUX PC & iPodAUX Media PC 247 072 251 161197 146 248 473 474 112400 177187 466457 230530 043 197 143323 328 353 354 356 457 494 070Default 139 147 126 185 085 213 277144 160 161 165 004 112 058 143 171 172Cable Boxes 020 030 111074 103 030Satellite Boxes 098 281087 111 091021 042 138 144 107001 083 095 105 035DVD-TV/DVD Combos DVD RecordersDVD-DVD/VCR Combos Wolf Cinema
Top Page Image Contents