Wolf Appliance Company DCL-200FD manual Erasing the Macro Commands

Page 32

ProScaler

B. Erasing the Macro Commands

Step 1] Press the Source Device Input button and the MUTE buttons simultaneously and hold for 3 seconds until the Device LED turns on. (The LED will stay on for 20 seconds. The next step must be entered during this period).

Step 2] Press the Macro button you wish to erase commands.

For erasing Macro Commands on the POWER ON or SYSTEM OFF button,

Press the POWER ON or SYSTEM OFF button and the MUTE buttons simultaneously and hold for 3 seconds until the TV and SAT/CABLE Devices LED turns on. (The LED will stay on for 20 seconds. The next step must be entered during this period).

Step 3] Press the CH UP button to save the selection. (The LED will blink three times to confirm the programming).

C. Programming Punch Through

1 Volume Control “Punch Through”

The remote control can be programmed so that either the Audio or TV Volume controls (Volume UP,Down and MUTE) will operate in any of the seven device modes.

Step 1] Press the Source Device Input button and the OK buttons simultaneously and hold for 3 seconds until the Device LED turns on. (The LED will stay on for 20 seconds. The next step must be entered during this period).

Step 2] Press the VOL Up button. (The Device LED will blink one time).

Step 3] Press the Audio button to set up for Audio volume control (or the TV button to set up for TV volume control. (The Device LED will blink three times to confirm the program).

2 Channel Control “Punch Through”

You can program the remote so that either the CABLE or TV Channel Controls (Channel Up, Down, Prev.CH and Channel number (0-9 buttons) will also operate in other modes on the remote control.

Step 1] Press the Source Device Input button and the OK buttons simultaneously and hold for 3 seconds until the Device LED turns on. (The LED will stay on for 20 seconds. The next step must be entered during this period).

Step 2] Press the CH Up button. (The Device LED will blink one time)

Step 3] Press the SAT button to set up for SAT channel control (The Device LED will blink three times to confirm the program).

3 Transport Control “Punch Through”

You can program the remote control so that VCR or DVD Transport Controls (Play, Stop, FF,REW, PAUSE, SKIP+, SKIP- and Record buttons) will also operate in other modes on the remote control.

Step 1] Press the Source Device Input button and the OK buttons simultaneously and hold for 3 seconds until the Device LED turns on. (The LED will stay on for 20 seconds. The next step must be entered during this period).

Step 2] Press the PLAY button. (The Device LED will blink one time)

Step 3] Press the DVD button to set up for DVD transport control (or the VCR button to set up for VCR transport control. (The Device LED will blink three times to confirm the program).

31

Image 32

Contents ProScaler Preface Copyright 2010 Wolf CinemaProScalerHigh Definition Video Processor User’s Manual Contents ProScalerDevice Codes Remote ControlAdvanced Functions Wolf Cinema’s ProScaler Basic Features IntroductionFlexible Component Video Inputs VideoHdmi Other Rear Panel ConnectorsNot used Service Reset Supplied Accessories Power cords SetupBefore Setting Up Cable Types System Remote Control Key ProScaler Functions Menu Button Press to enable on-screenConnecting the Projector and ProScaler Connect Hdmi cable from ProScaler to ProjectorRemote control ProScaler AimRemote at ProScaler IRRemote at the Projector For 2 seconds to turnConnecting Video Equipment Using an S-Video or a Composite Video CableConnecting Video Components with an Hdmi to Hdmi Cable ProScaler DVD player or DTV decoderConnecting a Computer Plug and Play Functions PCRemote & Menus Menus and User InterfaceMenu Organization Picture ControlsSelect Input Input Select SelectionZoom and Pan Zoom Control ScreenPicture Controls Zoom using the Remote ControlAspect Ratio Control using Menus or Remote Brightness Control Contrast ControlColor Saturation HueDetail Enhancement Scaler Main Menu Picture Controls Detail EnhancementProScaler Enhancement Scaler Main Menu Picture Controls ProScaler EnhancementSettings Menu Scaler Main Menu Settings Output FormatOutput Format Input PriorityOutput Connector Conditions Select Audio OutputAssociate Audio and Video Inputs Rename InputsScaler Main Menu Settings Factory Defaults Game ModeFactory Defaults Remote Control Wolf Cinema’s ProScaler Universal RemoteModes Punch ThroughMacros Programming the remote with the preprogrammed codePress the DVD button to program the DVDs Setup Code numbers Programming a Second DVD, etc. to Other Device ButtonsTo Erase a Learned Command From a Button Programming the remote with Learning MethodTo Erase All the Learned Commands in One Device Mode Press one of the Macro buttonsErasing the Macro Commands Press the Play button. The Device LED will blink one timeFactory Reset Advanced Functions Test PatternsProScalerHigh Definition Video Processor User’s Manual Auto Standby Deinterlacer Bias ControlsAuto Wake Up Component Input Hot Plug SourceDevice Codes AV Receivers and Audio Processors124 137 139 052 165 115 004086 164 152 238Blu-ray & HD DVD CD Players Video Cassette Recorders VCR 012 023 039 043 053025 066 070 145 083 133 140 157 163 074012 034 039 072 056 048 101 034153 070AUX Lighting AUX PC & iPodAUX Media PC 072 251 161 247197 146 248 473 474 112177 400187 466230 457530 043 197 143070Default 139 147 126 185 085 213 277 323 328 353 354 356 457 494144 160 161 165 004 112 058 143 171 172Cable Boxes 111 020 030074 103 030Satellite Boxes 281 098087 111 091107 021 042 138 144001 083 095 105 035DVD Recorders DVD-TV/DVD CombosDVD-DVD/VCR Combos Wolf Cinema