Sharp PG-LW2000 Picture Adjustment Picture Menu, Selecting the Picture Mode, Menu operation n

Picture Adjustment (“Picture” Menu)

QPAGE1

Picture SIG SCR PRJ1 PRJ2

1	Picture Mode		Standard
		Contrast	0
		Bright	0
		Color	0
2		Tint	0
		Sharp	0
		Red	0
		Blue	0

Menu operation n Page 36

QPAGE2

		Picture		SIG	SCR PRJ1 PRJ2
	Picture Mode				Standard
3			CLR Temp		0
2			BrilliantColorTM		1
4			C.M.S. Setting		On
			C.M.S.
5
			Film Mode		Auto
6			DNR		Level 2
7			Eco+Quiet		Off
			Reset

SEL./ADJ. ENTER END

SEL./ADJ. ENTER END

1 Selecting the Picture Mode

Selectable	Description	The default settings of each item when selecting Picture Mode
items		CLR Temp	BrilliantColorTM	Eco+Quiet
Standard	For standard image	0	1	Off
Presentation	Brightens portions of image for	0	2	Off
	more enhanced presentations.
Movie	Gives natural tint to the	–1	0	On
	projected image.
Game	Gives sharpness to the	0	1	Off
	projected image.
*sRGB	For high fi delity reproduction of	–	–	Off
	images from a computer.

•“sRGB” is displayed only when RGB signal is input.

•You can set or adjust each item in the “Picture” menu to your preference. Any changes you make are retained in memory.

Note

•You can also press PICTURE MODE on the remote control to select the Picture mode. (See page 31.)

•*sRGB is an international standard of color reproduction regulated by the IEC (International Electrotechnical Commission). As the fi xed color area has been decided by the IEC, the images are displayed in a natural tint based on an original image, when “sRGB” is selected.

You cannot set the items, “Red”, “Blue”, “CLR Temp”, “BrilliantColorTM” and “C.M.S.”, when “sRGB” is selected.

Info

•When “sRGB” is selected, the projected image may become dark, but this does not indicate a malfunction.

38