Binding Cables
The cables connected to the terminals on the rear of the monitor can be fastened with the cable clamps.
Insert the cable clamp into the cable clamp attachment on the rear of the monitor and fasten the cables.
: Cable clamp attachment
Cable 
Cable clamp attachment
Cable clamp
Removing the Handles
The handles can be removed.
The removed handles can be attached on the side.
1.Remove the handle screws and remove the handles and handle spacers.
2.Pass the handle screws through the handles and handle spacers in order and secure.
Caution
•The handles, handle screws and handle spacers are for this monitor. Do not use them for any other devices.
•When attaching the handles, always use this monitor’s handles, handle spacers, and handle screws.
•Be sure the handles are attached securely.
TIPS
•To lower the height of the handles, attach the handles with the handle spacers removed. To attach the handles with the handle spacers removed, secure the handles with the included handle screws (short).
Handle spacers
Handle screws
Handle
Handle spacers
Affixing the Protection Covers
| Protection cover | After installing the monitor, affix the protection covers | |||
|
|
|
|
| (4 pieces) as necessary. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Protection cover
E16