Specifications
nPN-V602 Product Specifications
Model |
|
|
| |||
LCD component |
|
|
| 60" Class [60 inch (152.4cm) diagonal] TFT LCD | ||
Max. resolution |
|
| (pixels) | 1366 x 768 | ||
Max. colors |
|
|
| Approx. 16.77 M colors | ||
Pixel pitch |
|
|
| 0.973 mm (H) × 0.973 mm (V) | ||
Viewing angle |
|
|
| 176° right/left/up/down (contrast ratio ≥ 10) | ||
Screen active area inch |
| (mm) | ||||
Computer input signal |
|
| Digital (DVI 1.0 | |||
Sync signal |
|
|
| Horizontal/vertical separate (TTL: positive/negative), | ||
|
|
|
|
|
| Composite sync (TTL: positive/negative) |
Video color system |
|
|
| NTSC (3.58MHz)/NTSC | ||
Plug and play |
|
|
| VESA DDC2B | ||
Power management |
|
|
| VESA DPMS, DVI DMPM | ||
Input terminals |
| PC/AV | Digital |
| HDMI x 1 | |
|
|
| PC | Analog |
| Mini |
|
|
| Audio |
|
| 3.5 mm mini stereo jack x 1 |
|
|
| Serial |
| ||
| When |
| PC/AV | Digital |
| |
| (optional) is |
|
|
|
|
|
| PC | Analog |
| BNC *1*2 x 1 | ||
| attached |
|
|
|
|
|
| AV | Composite video | BNC x 1 | |||
|
|
| ||||
|
|
|
| x 1 | ||
|
|
|
| Component | BNC (Y, Cb/Pb, Cr/Pr) *1 x 1 | |
|
|
| Audio |
|
| RCA pin (L/R) x 2 |
Output terminals |
| Audio |
|
| RCA pin (L/R) x 1 | |
|
|
| Serial |
| ||
| When |
| PC/AV | Digital |
| |
| (optional) is |
| External speaker |
| 10 W + 10 W [6 Ω] | |
| attached |
|
|
|
|
|
LAN terminal |
|
|
| 10 | ||
[When |
|
| ||||
Power requirement |
|
|
| AC 100 V - 240 V, 50/60 Hz | ||
Operating temperature *3 |
|
| 32°F to 104°F (0°C to 40°C) | |||
Operating humidity |
|
|
| 20% to 80% (no condensation) | ||
Power consumption |
|
|
| 510 W / 1.0 W / 1.0 W | ||
(maximum / input signal waiting mode *4 / standby |
| |||||
mode *5) |
|
|
|
| ||
Power consumption | 530 W | |||||
Dimensions (excluding protrusions) | inch (mm) | Approx. | ||||
Weight |
|
| lbs. (kg) | Approx. 97.0 (44) | ||
Weight |
| lbs. (kg) | Approx. 1.102 (0.5) | |||
*1 Cannot be used simultaneously.
*2 Does not support plug and play.
*3 Temperature condition may change when using the display together with the optional equipments recommended by SHARP. In such cases, please check the temperature condition specified by the optional equipments.
*4 When AUTO INPUT CHANGE is set to OFF.
*5 When STANDBY MODE is set to STANDARD. When STANDBY MODE is set to LOW POWER: 0.5 W.
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.
nPN-ZR01 (optional) Product Specifications
Model |
|
|
Remote control sensor box dimensions | inch (mm) | Approx. |
Remote control sensor box weight | lbs. (kg) | Approx. 0.220 (0.1) |