Remote Control Mode
With the remote control unit it’s possible to perform operation
of...
•The primary monitor
•Monitors with a specified ID No.
•All primary/secondary monitors
It’s necessary to specify which type of operation will be performed in advance.
1.If using the remote control unit, press MODE for approx 5 seconds.
If using the monitor buttons, hold both 
and 
at the same time on the primary.
REMOTE CONTROL MODE
MODE | ▲ THIS MONITOR ONLY▲ |
Operate this monitor.
OK CANCEL
2. Press 
or 
, select the mode, then perform settings.
THIS MONITOR ONLY
Performs operation of only the primary using the remote control unit.
[Example] If the volume is lowered, the volume of the primary will lower.
Secondary |
| Primary | |
ID No.: 2 |
| ID No.: 1 | |
|
| VOLUME 10 |
|
|
|
|
|
Secondary |
| Secondary | |
ID No.: 3 |
| ID No.: 4 | |
|
|
|
|
Press 
to lower the volume
SPECIFIED MONITOR
Performs operation of a monitor with a specified ID No. using the remote control unit.
Press 
or 
to select ID No., then press 
or 
to select the ID No. of the monitor that you will operate.
*When it receives signals from the remote control unit, “Operating specified monitor.” will be displayed on the
primary screen.
[Example.] If ID No. is set to 3 and the volume is lowered, the volume of the monitor for ID No.: 3 will lower.
| Secondary | Primary | |
| ID No.: 2 | ID No.: 1 | |
|
|
|
|
| Secondary | Secondary | |
| ID No.: 3 | ID No.: 4 | |
| VOLUME 10 |
|
|
|
|
|
|
Press 
to lower the volume
When you would like to confirm the ID No. that is set to the
monitor, press 
or 
to select ID No. DISPLAY, then press 
. The ID No. will be displayed on the screen.
ALL MONITORS
Performs operation of all primary/secondary monitors.
*ALL will be displayed on the menu of the primary.
*When it receives signals from the remote control unit,
“Operating all monitors.” will be displayed on the secondary screen. (Excluding power and input mode selection operation)
*Settings may not be reflected depending on the state of the connected monitors.
[Example] If the power for the primary is turned ON, the power for all the monitors will be turned ON.
|
| Secondary | Primary |
|
|
| ID No.: 2 | ID No.: 1 |
|
|
| Power ON | Power ON |
|
|
| Secondary | Secondary |
|
|
| ID No.: 3 | ID No.: 4 |
|
|
| Power ON | Power ON |
|
|
| Press POWER to turn the power ON |
| |
Press | or | to select EXPAND ITEM, and press | or | |
to select to perform this action or not.
OFF ...........For all monitors, only power, input mode
selection, and product information display operations will be recognized.
ON .............For all monitors, all operations will be
recognized.
After returning to the normal screen with procedure 3, when 5 minutes have passed from the end of operation, it will automatically return to OFF.
ALL [EXPAND ITEM] will be displayed on the menu of the primary.
*Even when REMOTE CONTROL MODE is set to ALL MONITORS, certain settings such as
LAN settings and ID No. settings will not be reflected on the other monitors.
3.Press 
or 
to select OK, then press MENU and return to the normal screen.
4.Perform operation.
Caution
•When the remote control mode is set to ALL MONITORS and EXPAND ITEM is set to ON, performing remote control operations that change adjustment values will result in the secondary adjustment values being the same as the primary adjustment values.
Secondary | Primary | Secondary | Primary |
ID No.: 2 | ID No.: 1 | ID No.: 2 | ID No.: 1 |
VOLUME 12 | VOLUME 11 | VOLUME 10 | VOLUME 10 |
Secondary | Secondary | Secondary | Secondary |
ID No.: 3 | ID No.: 4 | ID No.: 3 | ID No.: 4 |
VOLUME 9 | VOLUME 10 | VOLUME 10 | VOLUME 10 |
Press 
to lower the volume
Be careful of this when adjusting individual displays.
TIPS
•You can copy the setting values of the primary to other monitors with COPY SETTING VALUE. (See page 25.)
•The buttons on the monitor itself (primary) are also effective in remote control mode.
•When monitors connected in a daisy chain are in standby mode for LOW POWER, operation cannot be performed for subsequent monitors.