Basic Operation
5. BRIGHT +/- (Backlight adjustment)
Pressing 
or 
displays the BRIGHT menu when the menu screen is not displayed.
B R I G H T | 15 |
|
|
Press 
or 
to adjust the brightness.
*If you do not press any buttons for about 4 seconds, the BRIGHT menu automatically disappears.
*When BRIGHTNESS SENSOR is ON or ON: DISPLAY, when the brightness is adjusted BRIGHTNESS SENSOR will become OFF.
6.SIZE (Screen size selection) The menu is displayed.
Press 
or 
to select the screen size. (See page 20.)
If using the monitor buttons, select SIZE from the OPTION
menu.
7. DISPLAY
Displays monitor information. When you press this button again, the display disappears.
When the
•The display disappears automatically after about 15 seconds.
•LAN is displayed during LAN communication.
•If LAN is displayed in red, there is a duplicate IP address.
If using the monitor buttons, press 
under INFORMATION in the OPTION menu.
8. MODE (Color mode selection)
Each time you press this button, the color mode changes in the following order:
STD (Standard) → VIVID → sRGB →
HIGH ILLUMINANCE → STD...
•HIGH ILLUMINANCE is a display with colors suited to bright locations.
•sRGB applies to PC input only.
sRGB is international standard of color representation specified by IEC (International Electrotechnical Commission). Color conversion is made in taking account of liquid crystal’s characteristics and represents color tone
close to its original image.
If using the monitor buttons, select COLOR MODE from the
PICTURE menu.