Symphonic CSC520DE owner manual Sleep Timer, To Cancel the Closed Caption System

SLEEP TIMER

TV

The Sleep Timer function enables you to shut off the power without pressing POWER after a desired time period.

1Set “SLEEP TIMER”

Press SLEEP on the remote control. You may change the sleep time by pressing SLEEP on the remote con- trol repeatedly. The timer is set up

to 120 minutes, 30 minutes each SLEEP 120 MINUTE time SLEEP is pressed.

To cancel the sleep timer:

Press SLEEP repeatedly until "SLEEP 0 MINUTE" is displayed.

NOTES:

•When you disconnect the unit from the AC outlet, or if you have a power failure, the sleep time will be lost.

•To view the time left for sleep timer press SLEEP once when SLEEP display disappears. After 10 seconds, display will disappear again.

CLOSED CAPTION SYSTEM

TV

NOTE:

If the TV/DVD displays a black box on the TV screen, this means that the TV/DVD is set to the TEXT mode. To clear screen, select [CAPTION1], [CAPTION2] or [OFF].

Make sure ...

•TV/DVD power must be turned on.

1 Select “CAPTION”	- TV SETUP -
Press SETUP on the remote control.	CHANNEL SET UP
Press K or L to point to “CAP-	V-CHIP SET UP
	B CAPTION [OFF]
	LANGUAGE [ENGLISH]
TION”.

2Select your desired caption menu

Press ENTER until your desired	- TV SETUP -
caption menu appears.	CHANNEL SET UP
([CAPTION1], [CAPTION2],	V-CHIP SET UP
	LANGUAGE [ENGLISH]
	B CAPTION [OFF]
[TEXT1] or [TEXT2])

3Exit the caption setting mode

Press SETUP to return to TV mode.

You can view specially labeled (cc) TV programs, movies, news, etc. with either a dialogue caption or text display.

CAPTION mode: By choosing the caption mode, you can watch dramas, movies and news while captioning the dialogues and the contents of news.

TEXT mode: By choosing the text mode, you can watch half screen text information.

1-2:You may get these captions or text information by selecting either “1” or “2”. Caption “2” is used, usually for a second language if available.

TO CANCEL THE CLOSED CAPTION SYSTEM

Repeat steps [1] and [2], select [OFF] using ENTER. Press SETUP on the remote control to return to TV mode.

WHEN THE CLOSED CAPTION MODE IS ON

The On-Screen Display will disappear after 5 sec- onds.

NOTE:	• This is also true when MUTE is pressed.
Not all programs are broadcast with closed captions.	• If there is a power failure of any kind, the unit will
Your television is designed to provide error free	retain its memory for this feature.
closed captions from high quality antenna, cable and
VCR signals. Conversely, poor quality signals are
likely to result in caption errors or no captions at all.
Common signal conditions which may cause captions
errors are listed below:
• Automobile ignition noise
• Electric motor brush noise
• Weak snowy reception on TV screen
• Multiplex signal reception displaying picture
ghosts or airplane flutter.
– 16 –		EN

0C28