Sony TC-KE300 operating instructions Troubleshooting

Page 12

Additional Information

Troubleshooting

If you’ve experienced any of the following difficulties while using the tape deck, use this troubleshooting guide to help you remedy the problem. Should any problem persist, consult your nearest Sony dealer.

The function buttons do not work.

/The tape deck has just been turned on and does not operate for about 3 seconds. Wait until “P” stops flashing.

/Check that the cassette is inserted correctly and the cassette holder is closed completely.

The tape stops before the tape has been fully rewound.

/The tape is slack. Take up the tape slack.

/If “M” is shown in the display, press MEMORY repeatedly until the indication disappears.

/The cassette shell is bent. Use another cassette.

The tape deck does not play or record.

/The tape has reeled to the end.

/The tape is slack. Take up the tape slack.

/The record-protect tab has been removed from the cassette. Cover the slot with tape (page 11).

/Clean the heads and tape path and demagnetize the heads (page 11).

/Check that the tape deck is properly connected (page 4).

/Make sure the amplifier is correctly set.

There is excessive wow, flutter, or a sound dropout.

/The capstans and pinch rollers are dirty. Clean them (see page 11).

There is a decrease in sound level or a sound dropout./ The tape does not erase completely./Noise increases.

/The heads and tape path are dirty. Clean them (see page 11).

/The heads are magnetized. Demagnetize them (see page 11).

There is hum or noise.

/The tape deck is placed near a TV or VCR. Place the tape deck away from the TV or VCR.

/The tape deck is placed on or under the amplifier. Place the tape deck away from the amplifier.

There is an unbalanced tone.

/Check that the DOLBY NR control is set to the position where the tape was recorded.

/The tape deck is placed near a TV or VCR. Place the tape deck away from the TV or VCR.

12EN

The Multi-AMS function does not work properly.

/One of the tracks contains a long pause, a passage of low frequencies or very low volume, or a gradual increase or decreace in volume.

/The space before a track is less than 4 seconds long. Insert a blank space of 4 seconds using R REC MUTE button.

/The signal strength of the left and right channels are very different.

/There is noise in the space before a track.

/You pressed ) button immediately before the next track, or 0 button immediately after the beginning of the current track.

3-856-134-51(1)

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Stereo Cassette Deck Welcome About This ManualConventions Table of Contents Connecting the AC power cord UnpackingHooking Up the System HookupsPlaying a Tape PressDo not press Power or ¤ Eject while the tape deck is Operating. If you do so, the tape may be damagedTo adjust the recording balance To record with the Dolby NR systemTo locate Press What happens during Multi-AMS operationUpdating the calibration setting To cancel the automatic calibration functionIf Auto CAL flashes continuously Precautions Cleaning Cleaning the heads and tape pathDemagnetizing the heads Troubleshooting Specifications Glossary Index W, X, Y, ZNames of Controls Bienvenue Propos de ce manuelPréparatifs Fonctions élaborées pour l’enregistrementInformations complémentaires Déballage Raccordement de la platinePour raccorder la platine à une autre platine à cassette Lecture d’une cassette Pour Appuyez sur’appuyez pas sur Power ou ¤ Eject pendant le Enregistrement sur une cassettePour ajuster la balance Pour enregistrer avec le réducteur de bruit DolbyPour localiser Appuyez sur Que se passe-t-il quand le Multi-AMS marcheRemarques Mise à jour du calibrage RemarquePour annuler la fonction de calibrage automatique Si Auto CAL clignote sans interruptionPrécautions Remarques sur les cassettes NettoyageNettoyage des têtes et du parcours de la bande Démagnétisation des têtesEn cas de panne Spécifications Glossaire Nomenclature V, W, X, Y, Z¡Bienvenido ConvencionalismosPreparativos Operaciones avanzadas de grabaciónInformación adicional Índice alfabéticoDesembalaje Conexión a un sistemaConexión del cable de alimentación de CA ConexionesNo presione Power o ¤ Eject cuando está funcionando el Deck de cassettes. Esto puede hacer que se dañe la cintaPara Presione Grabación de una cinta Para ajustar el equilibrio de grabación Para grabar con el sistema de reducción de ruido NR DolbyPara localizar Presione Qué sucede durante el funcionamiento con el AMS- múltipleNotas Para cancelar la función de calibración automática Actualización del ajuste de calibraciónNota Si Auto CAL parpadea continuamentePrecauciones Notas sobre los cassettes LimpiezaLimpieza de las cabezas y la trayectoria de la cinta Desmagnetización de las cabezasGuía para la solución de problemas Especificaciones Glosario Índice alfabético Denominación de los controlesV, X, Y, Z ±a æ Mº‰ ¨GªŸ±¥¥M ØȧJ ›§l ØÈX ›§l¡ R¶a Nªy ¡§fi 16C Ƒµßi WÔ¥f UISµ t Œ ‰X§@ ¶±§l ¶AMS¢A¶¤ Ò µ¢A Oæ-Ò µ8ŒŒ´e ` N 10 d±a æ 11 Mº‰ 11 ¨GªŸ±¥¥M 12 WÆÊ Nªy Sµ t Œ ¨d¬I§@§U¨O߶¨Ï¶p§U˛±a µÿJ ¡n¿W s±µæ… u2`ª˙¶p¶Û±NdÆy s±µÏÒ§jæ C s±µ´e -§@wß‚ ¶U ’¶ ʧ q ˆ±ºC ±N AC qDÆyø¶bæfiß@Æ…M -ßO´ˆ§UPOWERŒ ¤EJECTCß´hi؇ l NÒŒß˘§Ò¥Óæ *t Œø˝ µ ±aÆ…±N¶’æ˜ s±µ Phonesc ´ˆ§U´O @ø˝ µHßK N~ QŸ µÆ… ±¤¬‡ REC Level H ’æ„ø˝ µ q CLÒ `ÿ´H C ˝ µ§§Aߢ§Ò HX PRO* t Œ±N¶¤ ß@ŒT߉X±µ§U˛´e ± ¶±§l ¶AMSG¶¤ º÷ ¬IC ¶ AMS æfiß@§§AµoÕ§ ªÚ±pN߉X ´ˆ§U ¶¤ ’æ„ æ¿£Mø˝ µ q Æ’ « ¶pGßAUTO CAL´˘ƒÚµ¤ŒŒ´e ` N

TC-KE300 specifications

The Sony TC-KE300 is a prominent example of a high-quality cassette deck that emerged in the late 1980s, specifically designed to cater to audiophiles and home recording enthusiasts. This model is part of Sony's extensive line of tape recorders that exemplifies the brand's commitment to audio excellence and innovative technology.

One of the standout features of the TC-KE300 is its dual cassette mechanism, which allows for both playback and recording from one tape to another. This feature was particularly appealing during a time when cassette tapes were a popular medium for music and voice recording. The device supports both normal and chromium dioxide tapes, maximizing playback fidelity and recording quality.

The TC-KE300 is equipped with Dolby B noise reduction technology, which significantly reduces background hiss during playback. This feature enhances listening comfort, especially for recordings made on higher-quality tapes. Additionally, the deck offers a range of playback speeds, ensuring compatibility with various tape formats and providing users with versatility for different audio settings.

Another notable characteristic of the TC-KE300 is its direct-drive motor system, which facilitates stable and accurate tape movement. This system minimizes wow and flutter—unwanted variations in pitch and speed—allowing for a cleaner sound reproduction. The precision engineering behind the motor ensures that recordings maintain their intended quality, appealing to discerning users.

The user interface of the TC-KE300 is straightforward yet functional. It includes illuminated buttons and a bright, easy-to-read cassette compartment that indicates loading and working status. The device also offers features like automatic pause and record levels, simplifying the recording process for users who may not be technically inclined.

In terms of build quality, the TC-KE300 demonstrates Sony's reputation for durability and reliability. The casing is robust, designed to withstand the wear and tear associated with regular use while maintaining an elegant aesthetic that fits well with any home audio system.

In summary, the Sony TC-KE300 stands as a reliable and well-engineered cassette deck representative of its time. Its combination of features, such as dual cassette capability, Dolby noise reduction, and direct-drive motor system, make it an attractive option for vinyl and tape enthusiasts alike. Although cassette technology has waned in popularity, devices like the TC-KE300 remain cherished by collectors and audio purists who appreciate its quality and craftsmanship.
Top Page Image Contents