Wayne-Dalton 9800 installation instructions Counter Installation

Page 25

 

 

20

Counter Installation

 

 

 

Tools Needed:

Install the right side counter gear, with

None

the missing tooth toward the outside

and away from the end bracket. Press

 

 

the counter gear onto the end bracket

 

until snaps engage.

 

Select the right hand counter cover and

 

align the hex of the counter cam with

 

the end of the winding shaft. Also, align

 

the “0” on the counter cover with the

 

raised rib on the end bracket. Press the

 

counter cover against the counter gear

 

until it locks into place.

 

Repeat for left hand side for double

 

spring applications.

 

NOTE: No drive gear, counter gear or

 

counter cover is required on left hand

 

side for single spring applications. Only

 

an end bracket is needed.

 

IMPORTANT: At this time do not

 

wind Counterbalance Springs!

 

 

Winding

Shaft Inside

End Bracket

Counter

Gear Missing

Tooth

Counter

Cover

Raised Rib

“0”

Hex of the

Counter Cam

INSTALLATION

 

 

 

21

Securing Center Bracket Bushing

CENTER

 

NOTE: If you are installing the idrive®

Tools Needed:

BRACKET

opener on your garage door, skip this step

 

ASSEMBLY

1/8” Drill Bit

and continue with Step 22.

 

 

 

7/16” Socket

NOTE: If you are installing a Doormaster™

 

opener, see optional Doormaster™ Bracket

 

Driver

installations on page 34, Figure B.

 

Power Drill

NOTE: If you are not installing the

 

 

idrive® opener on your garage door, you

 

 

must install the center bracket bushing

 

 

assembly. Follow these instructions for

 

 

non-idrive®operated garage doors.

 

IMPORTANT: TorqueMaster® spring tube must be level after center bracket assembly is mounted to header.

To locate the center bracket, mark the

 

header halfway between the flagangles

 

and level the TorqueMaster® spring tube.

 

Drill 1/8” pilot holes into header for the lag

 

screws. Fasten the metal bracket to the

(2) 5/16” x 1-5/8”

header using (2) 5/16” x 1-5/8” lag

screws.

hex head lag

 

screws

NOTE: Upon completion of this step, continue with step 26.

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your local25 yellow pages business listings or go to the Find a Dealer section online at www.Wayne-Dalton.com

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Important Notice Series 4 SectionTable of Contents Package Contents Door Section Identification Tools Required Power Drill3/16 Drill Bits Saw horses pairFailure to use approved Winding bars can cause spring Torsion Spring RemovalEnergy to be released Suddenly, resulting in severeUnwind Springs TorqueMaster Spring RemovalBracket and Drive Gear Removing the Old Door Extension Spring RemovalOpening Preparing the OpeningAttaching Quick Install InstallationFlagangle to Vertical Track Attaching Fully Adjustable Jamb Brackets Installing Fully AdjustableBottom Section DrumsStacking Sections Vertical TrackOperator Bracket Top Section Attaching Horizontal Track to Quick Install FlagangleAttaching Horizontal Track to Adjustable Flagangle Fall from Overhead Position Top BracketsCenter Bracket Bushing TorqueMaster Spring TubeAlways Determined from Inside Plug the motor power cord into Opener Idrive InstallationOpener back and forth slightly to help Aid alignmentCable Drum Installation End Brackets Drive Gear InstallationCounter Installation Positioning Support Bracket Handle Bracket Mounting DisconnectAttaching Disconnect Handle Securing Door Cable AdjustmentsFor Spring Winding Important do not USE Impact GUN To Wind SpringsVertical TRACKS. Adjustments to Setting Spring TensionWinding Bolt Rotation Recommended Spring TurnsRear Support Drum Wrap InstallationLevel and parallel with door Adjust weather seal or door stop ifWeather seal or door stop to both door Spring fittings may release fromSide Lock Do not Install Pull RopesPull Rope DoorMaster TM Bracket Gear assembly onto the TorqueMasterCenter of the TorqueMaster spring Tube Locate the center bracket, markMount operator to ceiling so that Trolley OperatorResult in Severe or Fatal Injury HeaderGlass Cleaning Instructions Cleaning Your Steel And Fiberglass Garage DoorAcrylic Cleaning Instructions Important do not USE a Pressure Washer on Garage DoorFiberglass Refinishing And Or Finishing Steel Preparation For PaintingBy a hard objects, or have been punctured Lifetime Limited Warranty Model
Related manuals
Manual 32 pages 11.46 Kb Manual 20 pages 42.88 Kb Manual 4 pages 60.02 Kb Manual 26 pages 11.64 Kb Manual 18 pages 4.37 Kb

9800 specifications

Wayne-Dalton is a well-known brand in the garage door industry, offering a wide range of models designed for durability, performance, and aesthetic appeal. Among its most popular series are the 9700, 5000, 8000, 9000, and 9800, each equipped with unique features and advanced technologies to meet diverse customer needs.

The Wayne-Dalton 9700 series is known for its combination of strength and insulation. This garage door is manufactured with a three-layer construction providing robust protection against the elements while offering excellent energy efficiency. The insulated steel construction can help maintain interior temperatures, making it ideal for attached garages.

The 5000 series, on the other hand, is designed for a more traditional look combined with modern performance. Featuring a lightweight design, it is made from durable materials that resist rust and corrosion. The 5000 series can be customized with different colors and styles, allowing homeowners to achieve the perfect aesthetic to enhance their property.

Moving on to the 8000 series, this model is designed for commercial applications and residential use where heavy-duty functions are necessary. It is built to withstand extreme weather conditions while providing optimal security with added strength features. The 8000 series offers smooth operation and minimal maintenance requirements, making it a great choice for those seeking reliability.

The 9000 series stands out with its stylish design and sleek finishes. This series offers advanced insulation options, coupled with numerous panel designs that provide a polished and sophisticated look. The 9000 model emphasizes both aesthetics and energy efficiency, making it a favorite among homeowners looking for a beautiful yet functional garage door.

Lastly, the 9800 series is the premium option within Wayne-Dalton’s offerings. This series is characterized by its high insulation value and thermal efficiency, thanks to its innovative construction techniques. The 9800 doors can be customized with numerous panel options and colors, delivering a luxury look while ensuring excellent performance.

In conclusion, Wayne-Dalton’s 9700, 5000, 8000, 9000, and 9800 series garage doors each feature distinctive characteristics and technologies aimed at enhancing durability, security, and aesthetics. Homeowners can find a reliable option within this range that suits their specific requirements, whether they prioritize insulation, style, or heavy-duty functionality. With Wayne-Dalton’s commitment to quality and innovation, these garage doors stand out in today’s market.
Top Page Image Contents