Wayne-Dalton 9800 installation instructions Attaching Disconnect Handle

Page 28

 

 

25

Attaching Disconnect Handle

 

 

 

Tools Needed:

NOTE: See idrive® main installation and

Phillips Head

owner’s manual for idrive® parts.

 

Screwdriver

Note: Bring motor to the down position

 

Wire Cutters

by pulling the disconnect cable. Insure

opener disconnect teeth are engaged

 

 

before installing disconnect handle.

 

Start the #6-20 x 1/2" screw into the

 

disconnect handle. Thread the

 

disconnect cable through the top of the

 

disconnect handle bracket and then the

 

disconnect handle.

 

Locate the disconnect handle in full

 

upper position of disconnect handle

 

bracket.

 

Remove all disconnect cable slack

 

between the opener and the top of the

 

disconnect handle bracket. Tighten

 

#6-20 x 1/2" screw into the disconnect

 

handle until snug, and then tighten

 

screw an additional 1 to 1-1/2 turns to

 

secure disconnect cable to the

 

disconnect handle. Trim off excess cable

 

from bottom of the disconnect handle.

 

CAUTION: Pull Cable only taut

 

enough to remove the Cable slack.

 

Pulling the Cable more could

 

cause Opener to disconnect from

 

the TorqueMaster® Spring Tube.

 

Apply emergency disconnect label next

 

to the mounted bracket. Use

 

mechanical fasteners if adhesive will

 

not adhere.

 

Using the emergency disconnect, pull

 

disconnect handle downwards and

 

place it in the manual door operated

 

position (Use disconnect label for

 

reference). Motor will be rotated 90°

 

from its packaged position.

 

If motor does not pivot 90°, see

 

troubleshooting section in the main

 

installation and owners manual of your

 

idrive® opener.

Emergency Disconnect

Label

Upper Position

#6-20 x 1/2”

Screw

Handle

Disconnect

Cable

Disconnect

Handle

Bracket

Manual operated position

Motor operated position

 

 

 

 

28 Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your local yellow pages business listings or go to the Find a Dealer section online at www.Wayne-Dalton.com

Image 28
Contents Series 4 Section Important NoticeTable of Contents Package Contents Door Section Identification Power Drill Tools Required3/16 Drill Bits Saw horses pairTorsion Spring Removal Failure to use approved Winding bars can cause springEnergy to be released Suddenly, resulting in severeTorqueMaster Spring Removal Unwind SpringsBracket and Drive Gear Extension Spring Removal Removing the Old DoorPreparing the Opening OpeningAttaching Quick Install InstallationFlagangle to Vertical Track Attaching Fully Adjustable Installing Fully Adjustable Jamb BracketsDrums Bottom SectionVertical Track Stacking SectionsOperator Bracket Top Section Quick Install Flagangle Attaching Horizontal Track toAttaching Horizontal Track to Adjustable Flagangle Top Brackets Fall from Overhead PositionCenter Bracket Bushing TorqueMaster Spring TubeAlways Determined from Inside Idrive Installation Plug the motor power cord into OpenerOpener back and forth slightly to help Aid alignmentCable Drum Installation Drive Gear Installation End BracketsCounter Installation Positioning Support Bracket Mounting Disconnect Handle BracketAttaching Disconnect Handle Cable Adjustments Securing DoorFor Spring Winding Important do not USE Impact GUN To Wind SpringsSetting Spring Tension Vertical TRACKS. Adjustments toWinding Bolt Rotation Recommended Spring TurnsDrum Wrap Installation Rear SupportAdjust weather seal or door stop if Level and parallel with doorWeather seal or door stop to both door Spring fittings may release fromSide Lock Do not Install Pull RopesPull Rope Gear assembly onto the TorqueMaster DoorMaster TM BracketCenter of the TorqueMaster spring Tube Locate the center bracket, markTrolley Operator Mount operator to ceiling so thatResult in Severe or Fatal Injury HeaderCleaning Your Steel And Fiberglass Garage Door Glass Cleaning InstructionsAcrylic Cleaning Instructions Important do not USE a Pressure Washer on Garage DoorSteel Preparation For Painting Fiberglass Refinishing And Or FinishingLifetime Limited Warranty Model By a hard objects, or have been punctured
Related manuals
Manual 32 pages 11.46 Kb Manual 20 pages 42.88 Kb Manual 4 pages 60.02 Kb Manual 26 pages 11.64 Kb Manual 18 pages 4.37 Kb

9800 specifications

Wayne-Dalton is a well-known brand in the garage door industry, offering a wide range of models designed for durability, performance, and aesthetic appeal. Among its most popular series are the 9700, 5000, 8000, 9000, and 9800, each equipped with unique features and advanced technologies to meet diverse customer needs.

The Wayne-Dalton 9700 series is known for its combination of strength and insulation. This garage door is manufactured with a three-layer construction providing robust protection against the elements while offering excellent energy efficiency. The insulated steel construction can help maintain interior temperatures, making it ideal for attached garages.

The 5000 series, on the other hand, is designed for a more traditional look combined with modern performance. Featuring a lightweight design, it is made from durable materials that resist rust and corrosion. The 5000 series can be customized with different colors and styles, allowing homeowners to achieve the perfect aesthetic to enhance their property.

Moving on to the 8000 series, this model is designed for commercial applications and residential use where heavy-duty functions are necessary. It is built to withstand extreme weather conditions while providing optimal security with added strength features. The 8000 series offers smooth operation and minimal maintenance requirements, making it a great choice for those seeking reliability.

The 9000 series stands out with its stylish design and sleek finishes. This series offers advanced insulation options, coupled with numerous panel designs that provide a polished and sophisticated look. The 9000 model emphasizes both aesthetics and energy efficiency, making it a favorite among homeowners looking for a beautiful yet functional garage door.

Lastly, the 9800 series is the premium option within Wayne-Dalton’s offerings. This series is characterized by its high insulation value and thermal efficiency, thanks to its innovative construction techniques. The 9800 doors can be customized with numerous panel options and colors, delivering a luxury look while ensuring excellent performance.

In conclusion, Wayne-Dalton’s 9700, 5000, 8000, 9000, and 9800 series garage doors each feature distinctive characteristics and technologies aimed at enhancing durability, security, and aesthetics. Homeowners can find a reliable option within this range that suits their specific requirements, whether they prioritize insulation, style, or heavy-duty functionality. With Wayne-Dalton’s commitment to quality and innovation, these garage doors stand out in today’s market.