Call the menu | 7. Programming stations |
MENU
OK
You can programme the TV stations in three diffe- rent ways.
a) Automatic station search
The automatic station search function searches the entire range of reception frequencies for TV stations. All stations which are found are placed in the station table, which is displayed at the end of the search operation. If you are not satisfied with the order in which the stations are stored, you can shift or delete stations as described in the next section.
Executing an automatic station search
TV-Menü
AV devices
Station table
Timer Configuration
: select, OK: go to settings.
Operation
Function for AV*
Function for F3*
Function for F1*
EURO sockets*
Station search
Country*
Language*
Station search (START)
•Press the „MENU“ key to call the TV menu
•Press the red key to open the „Configuration“ menu.
•Move the cursor to „Automatic station search“.
•Press the „OK“ key several times until the message „Searching for stations“ is displayed.
•A station table containing all stations which are found is displayed on the left side of the screen.
•At the end of the search, all stations which were found are sorted and displayed.
•To delete any unwanted stations, select them with the cursor and press the „II“ key.
•To save the stations, press the „OK“ key and enter, with the numeric keys, the number of the programme position where the first station is to be saved. The remaining stations are saved in the following programme positions.
b) Station search
*The number of subjects and sections displayed here depends on the opera- ting scope setting.
The station search function permits you to search for specific stations if you do not know their chan- nel number or frequency.
18