Metz MF 72TK80, MF 72TK81, MF 72TK86, MF 82TK96, MF 82TK97, MF 84TK89 manual

13. Colour standard Call the menu

☞In a menu with two asterisks (**), the set- tings for the menu item "Colour standard"

cannot be changed.						MENU
Your TV set normally detects the colour standard
(PAL, SECAM, NTSC, NTSC44, PAL60, PAL M)
automatically. If this automatic function does not
work, you can select the colour standard manually.
The colour standard function is set in the factory						OK
to „Automatic“.
Setting the colour standard:
• Select the programme position for
which you want to set the colour stan-					009	MDR
dard.					008	SW 3
				Picture-Volume	007	N24	Decoder
• Press the „MENU“ key to open the TV
				AV devices	006	PRO 7	Sound correction
menu.					005	RTL	Colour standard*
• Press the white key	to open the			Station table	004	SAT 1	Picture corrections*
					003	Bayern 3	Picture quality*
				Timer
„station table“.
					002	ZDF	Enter Logo
		Menü-TV		Configuration
• Move the cursor to „Colour standard“.					001	ARD	Frequency/channel
• Press the „OK“ key to confirm your				: select,
						Colour standard	Automatic mode
			OK: go to
selection and then, in the setting win-
			settings.

dow, use the – + key to select the appropriate colour standard.

•Press the „OK“ key to save the new setting.

•Press the „TV“ key to close the menu.

OK

2)Available only on TV sets which are equipped with this option.

*The number of subjects and sections displayed here depends on the opera- ting scope setting.

33