Metz MF 72TK80, MF 72TK81, MF 72TK86, MF 82TK96, MF 82TK97, MF 84TK89 manual Few seconds and then

Problem	Possible cause	Remedy
The TV set does not	• There is no visual contact bet-	• Ensure that there are no
react to commands	ween the remote control unit	obstacles.
from the remote con-	and the TV set.	• Avoid direct exposure
trol unit.	• Sunlight is falling directly on	to sunlight.
	the infrared of the TV set.	• Replace the batteries.
	• The batteries in the remote	• Switch on the TV set
		with the mains switch.
	control unit are exhausted.
		• Switch the TV set off
	• The TV set has been switched
		with the mains switch
	off with the mains switch.
		and then switch it on
	• The microprocessor is faulty.
		again.
Unnatural colours,	• Strong magnetic fields in the	• Move the loudspeakers
coloured spots on	vicinity of the TV set (from	away from the TV set.
the screen	loudspeakers or other devices)	• If the coloured spots per-
		sist, switch the TV set off
		with the mains switch, wait
		a few seconds and then
		switch it on again.
After the TV set has	• The childlock function has	• Enter the code number
been switched on,	been programmed to prevent	with which the childlock
the message „Please	selection of any station.	function was pro-
enter code“ is
		grammed.
displayed.
The TV set does not	• The childlock function has	• Enter the code number
switch to the selected	been programmed to permit	with which the childlock
programme position.	selection of only the stations	function was pro-
Instead, a list of sta-
	shown in the list.	grammed.
tions is displayed with
a teddy-bear symbol.
You are playing back a	• The picture format for the AV	• Select the AV program-
film from an AV device	programme position (e.g.	me position and set the
in the aspect ratio	AV2) has not been set correct-	picture format to 16:9
16:9, but the picture is
	ly in the TV menu.	or "Automatic" (see
displayed in the 4:3
		Section 11.1).
format.

74