21
3. Remote control unit
The Metz remote control unit RG 12 can be used to remotely control all Metz TV sets with the type designation "TH" (see the Operating Instructions of the TV set or look at the label on the back of the set) or later models (such as TK, TL, ...) as well as video recorders VCR1 and VCR 2, DVD players and HiFi equip- ment (such as radios, cassette players, CD players, amplifiers, etc.) made by Metz or various other manufacturers.
The remote control unit transmits com- mands to the TV set with the aid of infra- red light. You should always point the remote control unit directly at the TV set. The remote control unit may possibly inter- fere with other infrared devices (such as infrared headphones) within its range.
☞Sunlight falling directly on the TV set may interfere with the operation of the remote control unit, because the TV set cannot detect the infra- red signals from it. The TV set must first be switched on with the main switch before the remote control unit can be used.
The remote control unit is programmed as follows before it leaves the factory:
• TV Metz TV sets with the type designation "TH"
• VCR1 Metz video recorders with remote control unit RH51
• VCR2 Metz video recorders with remote
22control unit RF52
•DVD Metz DVD players with remote
control unit RG/RH374
•HiFi Metz HiFi CD receiver HE 11 with remote control unit F11
Never load rechargeable batteries into the battery compartment of the remote control unit!
Only use two 1.5V LR03/AM4 batte- ries, size AAA.
6