25. Automatic Sat station search
TV-Menü
AV devices
Station table
Timer Configuration
: select, OK: go to settings.
Most of the common Sat programmes are already stored in the TV set. These programmes are divi- ded into groups as shown in the
Starting the station search
•Use the cursor control key to select the desired Sat station card (in the example on the left: Astra) and press the „OK“ key to confirm your selection.
•Press the „OK“ key again to load the selected Sat stations.
•After all stations have been loaded,
they are displayed in a station list.
• If desired, you can then select indivi- dual stations and delete them by pres- sing the ll key.
• Press the „OK“ key to confirm that you want to save the remaining stations.
• Use the numeric keys to enter the number of the programme position in which the first station in this list is to be saved. The other stations in the list will be saved in the programme posi- tions following the selected position. CAUTION! This will overwrite any sta- tions currently in the specified and fol- lowing positions!
•If you are not sure whether you want to save the stations, you can cancel the operation by pressing the „TV“ key.
•If you want to save the stations in the list, press the „OK“ key.
If you are not satisfied with the order in which the Sat stations are saved, see the section „Sorting stations“.
Possible only if a satellite upgrade kit is installed!
62