Metz MF 72TK80, MF 72TK81, MF 72TK86, MF 82TK96, MF 82TK97, MF 84TK89 manual

7. Programming stations	Call the menu
Executing a station search
• Press the „MENU“ key to display the TV menu.	MENU
• Press the white key to display the station

table.
• Move the cursor to en empty programme posi-
tion (or to a position containing a station you
wish to replace with the new station).
• Move the cursor to „Frequency/Channel“.
• Press the „OK“ key.	OK
• In the setting window which is then displayed,
move the cursor to „Search“.

•Press the - + key to start the search.

•The search stops when the first station

is found.
					009 MDR
• If you want to save this station, press					008 SW 3		Decoder
the „OK“ key.				Picture-Volume	007 N24		Sound correction
					006 PRO 7		Colour standard*
• If you do not want to save this station,				AV devices
					005 RTL		Picture corrections*
press the - + key again to continue the				Station table	004 SAT 1		Picture quality*
search.					003 Bayern 3		Enter Logo
				Timer
					002 ZDF		Frequency/channel
c) Direct channel input		TV-Menü		Configuration	001 ARD		TV-standard 2)
				: select,	Channel	6	Cable channel	--
You can programme a station directly by			OK: go to		Frequency 182.31 MHz
			settings.
					Scan operation		ARD
entering its channel number with the
numeric keys (you must, of course, know the
channel number of the desired station).
Executing direct channel input
• Press the „MENU“ key to display the TV menu.
• Press the white key	to display the station					OK
table.

• Move the cursor to en empty programme posi-

tion (or to a position containing a station you	2) Available only on TV sets
wish to replace with the new station).
	which are equipped with this
• Move the cursor to „Frequency/Channel“.
	option.
• Press the „OK“ key.
	* The number of subjects and sections
	displayed here depends on the opera-
	ting scope setting.

19