3. Remote control unit
1.Programming the remote con- trol unit for control of your
equipment
In order to remotely control your consumer electronics equipment, you must program- me each of the various levels of the remote control unit with a
•TV
The TV level is already programmed for Metz TV sets with the type designa- tion "TH". This programming cannot be changed.
•VCR 1 (Video recorder 1) VCR 2 (Video recorder 2)
HiFi (e.g. amplifier, tuner, tape, etc.) The remote control unit must be pro- grammed with a code from the code list for each level you want to use.
☞Note the factory settings (Page 6) and the list of available codes at the end of these Operating Instructions.
1.1Programming the codes for VCR and DVD
☞When you select the steps a)...c) ,you have about 15 seconds to continue with the next step. If you do not do so within this time, the unit automatically returns to the TV level
a)Use the Select key to select the desired level. The coloured LED for the cur- rently selected level lights.
b)Press the keys 
and F1 together and hold them until the LED blinks twice.
c)Enter the desired code (see the code list) with the numeric keys. If this code is accepted, the LED again blinks twi-
ce. If the code does not exist in the table, the LED lights for about two seconds.
1.2Programming the codes for CD Player, Tuner and Tape
☞When you select the steps a)...c) ,you have about 15 seconds to continue with the next step. If you do not do so within this time, the unit automatically returns to the TV level.
a)Use the Select key to select the HiFi level. The coloured LED HiFi lights.
b)Press the key 
, release it and then press the key: ...
...F1 for CD player
...F2 for Tuner (radio)
...F3 for Tape (cassette recorders) der Fernbedienung drücken, bis die until the LED blinks once.
c)Enter the desired code (see the code list) with the numeric keys. If this code is accepted, the LED again blinks twi- ce. If the code does not exist in the table, the LED lights for about two seconds.
1.3 Programming the code for HiFi amplifier
☞When you select the steps a)...d) ,you have about 15 seconds to continue with the next step. If you do not do so within this time, the unit automatically returns to the TV level.
a)Use the Select key to select the HiFi level. The coloured LED HiFi lights.
b)Press the key 
, release it and then press and hold the F3 key until the LED blinks twice.
8