Panasonic AJ-D750P Analog Component Video OUT connector, Analog Composite Video OUT connectors

Page 18

Controls and their functions (continued)

<Connector area>

ANALOG COMPONENT VIDEO OUT connector

The analog component video signal is output from this connector.

ANALOG COMPOSITE VIDEO OUT connectors

The analog composite video signals are output from these connectors.

The video signal with signals superimposed on it can be output from the VIDEO OUT3 connector.

The superimpose function can be set ON or OFF on the setup menu No. 006 (SUPER).

DIGITAL AUDIO IN/OUT connector

This I/O connector is for digital audio signals which comply with the AES/EBU standard.

SERIAL DIGITAL COMPONENT AUDIO/VIDEO IN/OUT connector (optional AJ-YA750P interface board required)

This I/O connector is for digital component audio and video signals which comply with the SMPTE 259M-C/272M standard.

Remote control connectors

The unit can be controlled from an external source by connecting the unit with another unit or an external controller.

There are two remote control connectors, one for IN/OUT uses and the other for OUT uses.

IN/OUT: For connection with an external controller. For connection with deck-to-deck operation.

OUT: For connection with parallel running operations. For use in a loop-through configuration.

ENCODER REMOTE connector

The external encoder/controller is hooked up to this connector when the video output signal and other settings are to be adjusted from an external source.

RS-232C connector

PARALLEL REMOTE connector

This is used when operating the unit from an external source.

- 1 8 -

Image 18

Contents Operating Instructions FCC Note Contents AES/EBU audio input/output Analog input/outputSerial digital input/output Pin RS-422A/RS232C remoteAutomatic editing functions Controls and their functions Video Power switchInput Select switches AudioStop button Play buttonREC button FF buttonINT/EXT switch TC/CTL switchTC/UB switch TAPE/EE switch In the stop modeRemote lamp REMOTE/LOCAL switchSHTL/SLOW switch Search buttonPREVIEW/REVIEW buttons Preroll buttonAuto Edit button IN/SET/OUT buttonsCassette insertion display lamp Headphones jackTime code buttons Consumer cassette insertion display lampVolume control Monitor Select switchesMonitor SET button Chroma Level control and switch Encoder Control switchVideo Level control and switch SET UP control and switch Composite output only variableSET button REC Inhibit switchMenu button Diag buttonConnector area Controls and their functionsAnalog Audio in connectors AC in connectorSignal GND terminal CUE in connectorDigital Audio IN/OUT connector Analog Component Video OUT connectorAnalog Composite Video OUT connectors Remote control connectorsConnections when one unit is used Set the Control switch on the front panel to LocalConnections when 2 units are used deck to deck Source machineRecorder Connections with editing controller WFM General purpose cassette Description TapesType Consumer cassette AJ-P6MP, AJ-P12MP, AJ-P23MP, AJ-P33MP, AJ-P63MPSwitching on the power/inserting the cassette STOP/STAND by mode Still Timer SettingAdjusting the audio level 1Selecting video/audio input signalsAdjusting the video level RecordingPlayback Jog mode Shuttle modeJog/shuttle modes Manual editing Preroll Automatic editing Deck to Deck Switch settings and adjustments Automatic editingSelect the editing mode Entering the edit points Match frame processing functionNegative duration function Checking the edit points Calculating the durationResetting both the edit in and OUT points Resetting either the edit in or OUT pointModifying the edit points Preview Retry function Executing automatic editingPostroll Auto tag editingReview L i t e d i t i n g Video level Video output encoder output signal adjustmentsSetup level Chroma level and hueSetup default settings SETUP-MENU Init SET YESPLAY/NOSTOPSetup setting menus Changing the fileSystem menu Display0005 Video OUT 3 connector 0012 User menu BasicSetup menus User menuUser menu Operation User menu Interface STD 301 IN/OUT DELNON-STD Servo REF EXTEdit Setting Step TimerSRC ProtectTime Code Binary PhaseDF Mode CorrUser menu Video CAMAudio Superimposed Fine REC CUEPB Fade ST2Time code/user bit Time codeUser bit Setting the internal time code Recording internal/external time codesReproducing the time code/user bit Characters displayed Operation modeSuperimpose screen Display positionMenu No setting? Servo referenceServo reference setting tables Audio V Fade Function Abbr Circuit Full name Function Factory settingPrinted circuit board NameRack mounting Connector signals Pin NoSignal Pin No SignalPin No Signal Video head cleaning CondensationSpecifications Other input/output connectorPanasonic de Mexico S.A. de C.V