Panasonic AJ-D750P manual User menu Basic, Video OUT 3 connector 0012

USER menu <BASIC>

Item

No. Superimposed display

000 P-ROLL TIME

Setting

No. Superimposed display

0000 0S

0005 5S

0015 15S

Description

This sets the preroll time which can be set from 0 to 15 seconds in l-second increments.

<Note>

When the unit is set to automatic editing [PREVIEW, AUTO EDIT], the unit will not operate if the preroll time is set to 0 seconds.

001 CHARA H-POS

002 CHARA V-POS

003 DISPLAY

SEL

0 0 4 LOCAL ENA

005 TAPE TIMER

006 SUPER

0000	0 This sets the position of the characters on the horizontal
	5	plane for the time code and other super displays output to the
0005		VIDEO OUT 3 connector.
		<Note>
0012	12	1. When setting this item, the DISPLAY SEL status is output to
		VIDEO 3 even if SUPER OFF has been set. However, when
		the menu is exited, operation complies with the SUPER
		OFF/ON setting.
		Also, CHARA TYPE is output to VIDEO 3 according to the
		status set in the menu.
		2. When the DISPLAY SEL setting causes characters to
		extend beyond the edges of the screen, the setting value is
		changed so that the characters are automatically displayed
		in a position on the screen.
0000	0	This sets the position of the characters on the vertical plane
		for the time code and other super displays output to the
0018	18	VIDEO OUT 3 connector.
		<Note>
0022	22	1. When setting this item, the DISPLAY SEL status is output to
		VIDEO 3 even if SUPER OFF has been set. However, when
		the menu is exited, operation complies with the SUPER
		OFF/ON setting.
		Also, CHARA TYPE is output to VIDEO 3 according to the
		status set in the menu.
		2. When the DISPLAY SEL setting causes characters to
		extend beyond the edges of the screen, the setting value is
		changed so that the characters are automatically displayed
		in a position on the screen.
0000	TIME This selects what information is to be provided by the time code
0001	T&STA	and other super displays output to the VIDEO 3 connector.
0002	T&S&M	0: Time only.
		1: Time and status.
		2: Time, status and mode.
		<Note>
		The mode display is DVCPRO mode display during DVCPRO
		format and DV mode display during DV format.
0000	DIS This selects the buttons which can be operated on the front
0001	ST&EJ	panel when the REMOTE/LOCAL switch has been set to
0002	ENA	REMOTE.
		0: No buttons can be operated.
		1: Only the STOP and EJECT buttons can be operated.
		2: All buttons except for the RECORDER and PLAYER
		buttons can be operated.
0000	±12h This selects the 12 or 24 hour display for the CTL counter.
0001	24h	0: 12 hour display
		1: 24 hour display
0000	OFF This selects whether the time code and other super display
0001	ON	which are output to the VIDEO OUT 3 connector is to shown.
		0: Not shown.

1: Shown.

The underline on the setting item denotes the initial setting.

- 4 5 -