Panasonic AJ-D750P AC in connector, Signal GND terminal, Fuse holder, Fan motor, CUE in connector

Page 17

<Connector area>

AC IN connector

This is for connecting the unit to the power outlet using the power cord provided.

SIGNAL GND terminal

This terminal is connected to the signal unit which is connected to the unit in order to reduce noise. It is not connected to ground for safety purposes.

Fuse holder

This contains a 5A fuse.

Fan motor

This is for cooling the unit.

The AUTO OFF lamp lights when trouble has caused the fan motor to stop. If the unit is still operated in the warning status, the temperature inside the deck will rise, and when it exceeds the safety temperature, all the units operations will be shut down.

ANALOG AUDIO IN connectors

These are the analog audio input connectors.

CUE IN connector

The analog signal to be recorded on the CUE track is supplied to this connector. The audio signals from a microphone can also be recorded by selecting the –60dB input mode on-screen.

TIME CODE IN connector

This is the connector for recording the external time code on the tape.

ANALOG COMPONENT VIDEO IN connector

The analog component video signal is supplied to this connector.

ANALOG COMPOSITE VIDEO IN connectors and 75 termination switch

The analog composite video signal is supplied to these two connectors which are connected in a loop-through configuration. When the termination is required, set the switch to ON.

REF VIDEO IN connectors and 75 termination switch

These are the input connectors for the reference video signals. When the termination is required, set the switch to ON.

ANALOG AUDIO OUT connectors

The analog audio signals are output from these connectors.

TIME CODE OUT connector

The playback time code is output from this connector during playback.

During recording, the time code generated by the internal time code generator is output.

CUE OUT connector

The analog signal recorded on the CUE track is output from this connector.

MONITOR OUT connector

During playback, the playback signals from the CUE track or PCM audio signal CH1/CH2 are output from this connector.

- 1 7 -

Image 17
Contents Operating Instructions FCC Note Contents Serial digital input/output Analog input/outputAES/EBU audio input/output Pin RS-422A/RS232C remoteAutomatic editing functions Controls and their functions Input Select switches Power switchVideo AudioREC button Play buttonStop button FF buttonTC/UB switch TC/CTL switchINT/EXT switch TAPE/EE switch In the stop modeSHTL/SLOW switch REMOTE/LOCAL switchRemote lamp Search buttonAuto Edit button Preroll buttonPREVIEW/REVIEW buttons IN/SET/OUT buttonsTime code buttons Headphones jackCassette insertion display lamp Consumer cassette insertion display lampMonitor SET button Volume controlMonitor Select switches Video Level control and switch Encoder Control switchChroma Level control and switch SET UP control and switch Composite output only variableMenu button REC Inhibit switchSET button Diag buttonControls and their functions Connector areaSignal GND terminal AC in connectorAnalog Audio in connectors CUE in connectorAnalog Composite Video OUT connectors Analog Component Video OUT connectorDigital Audio IN/OUT connector Remote control connectorsSet the Control switch on the front panel to Local Connections when one unit is usedRecorder Connections when 2 units are used deck to deckSource machine Connections with editing controller WFM Type Consumer cassette TapesGeneral purpose cassette Description AJ-P6MP, AJ-P12MP, AJ-P23MP, AJ-P33MP, AJ-P63MPSwitching on the power/inserting the cassette Still Timer Setting STOP/STAND by modeAdjusting the video level 1Selecting video/audio input signalsAdjusting the audio level RecordingPlayback Jog/shuttle modes Jog modeShuttle mode Manual editing Preroll Automatic editing Deck to Deck Automatic editing Switch settings and adjustmentsSelect the editing mode Negative duration function Entering the edit pointsMatch frame processing function Calculating the duration Checking the edit pointsModifying the edit points Resetting both the edit in and OUT pointsResetting either the edit in or OUT point Preview Postroll Executing automatic editingRetry function Auto tag editingReview L i t e d i t i n g Setup level Video output encoder output signal adjustmentsVideo level Chroma level and hueSETUP-MENU Init SET YESPLAY/NOSTOP Setup default settingsChanging the file Setup setting menusDisplay System menuUser menu Basic 0005 Video OUT 3 connector 0012User menu Setup menusUser menu Operation User menu Interface NON-STD Servo REF 301 IN/OUT DELSTD EXTEdit Setting SRC TimerStep ProtectTime Code DF Mode PhaseBinary CorrCAM User menu VideoAudio Superimposed PB Fade REC CUEFine ST2User bit Time code/user bitTime code Recording internal/external time codes Setting the internal time codeReproducing the time code/user bit Superimpose screen Operation modeCharacters displayed Display positionServo reference Menu No setting?Servo reference setting tables Audio V Fade Function Printed circuit board Factory settingAbbr Circuit Full name Function NameRack mounting Pin No Connector signalsPin No Signal Signal Pin NoSignal Condensation Video head cleaningOther input/output connector SpecificationsPanasonic de Mexico S.A. de C.V