Panasonic AJ-D750P manual STOP/STAND by mode, Still Timer Setting

STOP/STAND BY mode

When the STOP button is pressed, the unit goes into the stop mode. The STOP lamp lights and the tape stops traveling.

In order to protect the tape, the unit goes into the standby OFF mode after the time set by setting menu No.400 (STILL TIMER) has elapsed. When the STOP, REW, FF or PLAY button is pressed, the unit will go into the appropriate mode.

When the STAND BY button is pressed, the unit goes into the standby ON/OFF mode. When the button’s lamp is lighted, the unit is in the standby ON mode.

When the button is pressed during the stop mode, the unit goes into the standby OFF mode and half-loading mode and the lamp goes off.

When the button is pressed during the standby OFF mode, the unit goes to the standby ON mode.

Still Timer Setting

In order to protect the tape and VTR helical heads, it is recommended that the Still Timer be set for automatic tape protection mode in 30 seconds or under.

Page 51 indicates the settings for menu item 400-Still Timer set. Still Timer settings 4 and below will best protect the tape.

2

1

- 2 5 -