Panasonic AJ-D750P manual Edit Setting

USER menu
<EDIT> (continued)
	Item		Setting	Description
No.	Superimposed	No.	Superimposed
	display		display

306 EDIT	0000	N-DEF
RPLCE2	0001	CH1
	0002	CH2
	0003	CH1+2

This sets the channel assignments for the controller’s analog audio preset when editing the digital audio of the VTR using a controller which does not have a digital audio edit preset control function.

This selects the channel concerned when the VTR CH2 edit preset is set in compliance with the ON or OFF presetting for the analog audio signals designated by the controller.

0:Not set.

1:Compliance with analog CH1 edit preset.

2:Compliance with analog CH2 edit preset.

3:Compliance with either analog CH1 or CH2 edit preset.

307 EDIT	0000	N-DEFThis sets the channel assignments for the controller’s analog
RPLCEC	0001	CH1 audio preset when editing the digital audio of the VTR using a
	0002	CH2	controller which does not have a digital audio edit preset
	0003	CH1+2	control function.

This selects the channel concerned when the VTR CUE edit preset is set in compliance with the ON or OFF presetting for the analog audio signals designated by the editor or controller.

0: Not set.

1: Compliance with analog CH1 edit preset.

2: Compliance with analog CH2 edit preset.

3: Compliance with either analog CH1 or CH2 edit preset.

308 CONFI	0000	OFF
EDIT	0001	ON

This selects whether to conduct simultaneous playback while editing is in progress.

0:No simultaneous playback

1:Simultaneous playback

<Note>

Simultaneous playback is valid when the TAPE/EE switch is set to TAPE.

309 AUD EDIT	0000	CUT
IN	0001	FADE

This selects the connection method for the digital audio edit IN point.

0:Cut processing

1:V Fade processing

310 AUD EDIT	0000	CUT
OUT	0001	FADE

This selects the connection method for the digital audio edit OUT point.

0:Cut processing

1:V Fade processing

311 AUTO	0000	DIS
ENTRY	0001	ENA

This selects whether the IN point is to be entered using the PREROLL button when it has not been entered.

0:IN point is not entered.

1:IN point is entered.

312 CF ADJ	0000	PLAYER
SEL	0001	RECORD

This selects the CF adjustment deck with deck-to-deck editing.

0:The player’s edit IN/OUT points are adjusted. (reference as the RECORDER side)

1:The recorder’s edit IN/OUT points are adjusted. (reference as the PLAYER side)

313	AFTER	0000	STOP	This selects the mode after cue-up operation is complete.
	CUE-UP	0001	STILL	0: STOP mode

1:SHTL STILL mode

The underline on the setting item denotes the initial setting.

- 50 -