Panasonic AJ-D750P manual Time Code

USER menu
<TIME CODE>
	Item		Setting	Description
No.	Superimposed	No.	Superimposed
	display		display
500	VITC	0000	10L	This sets the position where the VITC signal is to be inserted.
	POS-1	0001	11L	(The same line as for VITC POS-2 in 501 cannot be
		0002	12L	selected.)
		0003	13L
		0004	14L
		0005	15L
		0006	16L
		0007	17L
		0008	18L
		0009	19L
501	VITC	0010	20L	This sets the position where the VITC signal is to be inserted.
		0000	10L
	POS-2	0001	11L	(The same line as for VITC POS-1 in 500 cannot be
		0002	12L	selected.)
		0003	13L
		0004	14L
		0005	15L
		0006	16L
		0007	17L
		0008	18L
		0009	19L
		0010	20L
502	VITC	0000	BLANK	This selects whether to output the VITC data to the positions
	BLANK	0001	THRU	selected by VITC POS-1 in 500 and VITC POS-2 in 501.
				0: Data is not output.

1: Data is output.

5 0 3 TCG	0000	TC&UB
REGEN	0001	TC
	0002	UB

This selects the signal to be regenerated when the time code generator (TCG) in the REGEN mode.

0:Both the time code and user bit are regenerated.

1:Only the time code is regenerated.

2:Only the user bit is regenerated.

5 0 4 REGEN	0000	AS&IN
MODE	0001	ASSEM
	0002	INSRT
	0003	SW

This selects whether the time code is to be regenerated during automatic editing using the unit’s control panel.

0:Time code is regenerated with assemble or insert editing.

1:Time code is regenerated with assemble editing.

2:Time code is regenerated with insert editing.

3:Setting complies with REGEN/PRESET switch setting.

5 0 5 E X T T C	0000	LTC
SEL	0001	VITC

This selects the time code to be used when an external time code is to be used.

0:The LTC of the TIME CODE IN connector is used.

1:The video signal LITC is used.

The underline on the setting item denotes the initial setting.

- 5 2 -