Goldstar R-E21M On Screen Display, On Screen Function Displays, VCR To in from ANT, Catv AV

Diagram No. 3

Cable Antenna I

o

A

c o ter

VCR	TO "IN FROM ANT" !
				ii	ii I •
			,"		\
				'"I
	rr--,	'"		Cable
			Converter
						TV
				OUT
	To "OUT TO TV"			I	VHF ANT

Use A position of A-B switch for watching and/or recording channels that do not require a cable con- verter box.

Use B position of A-B switch for watching and/or recording channels that require a cable converter box.

ON SCREEN DISPLAY

Set TV to channel 3 or 4 to match OUTPUT CHANNEL

ON SCREEN FUNCTION DISPLAYS

Function of the "DISPLAY" button is, when pressed, to display the current time on the IV screen, along with the operation mode, the tape counter, the counter memory and channel number. The on

screen overlays will appear momentarily as a clear indication that a main function or a channel has

been changed with the remote control or at the VCR.

Whenever a function button (Stop, FF, etc.) is pressed, or when you change channels, a 4 second OSD appears. The function name and the channel

number (if tuned) are displayed as a overlay for 2 seconds.

NOTE: The on-screen display will not be recorded.

SET on back of VCR.

CHANNEL DISPLAY

	CH 02_69
FUNCTION DISPLAY	CATV )1_ 125
	CATV AV
TAPE SPEED
DISPLAY ---[_]
(SP/LP/EP)

U¥_	102:15PMI
DATE DISPLAY	CLOCK DISPLAY
(MONTH/DAY/YEAR)	(12:00 AM--- 11:59 PM)

Pressing "DISPLAY" button changes the "IV screen in the following sequence.

Press once Press three times