Goldstar R-E21M owner manual Ogo, Main Menu English, Clock SET, Time -J

CLOCK SETTING (By using the Remote Control)

_Things to know before starting w

•The clock uses the 12-hour system. (Be sure to set AM and PM correctly.)

•When the VCR and "IV are turned on for the first

time, the clock will read ..... . If the clock

display disappears, press the DISPLAY button to recall it.

• The buttons for setting the clock are on the

remote control.

	"CLEAR" Button
"MENU" Button	"DISPLAY" Button

• While you are setting the clock, the "Menu

display" on the TV screen will prompt you

through the procedures.

• If you have entered a wrong number by mistake,

press "CLEAR" button several times to erase

the wrong number. Then re-entera correct

number.

• If you input an illogical time or date (13th month

for example), "?" will appear on the TV screen.

(It will not enter the memory.)

Number Buttons

"O" through "9"

r, i.

o®®:

® o:

OGO

li}	Turn on the power		of both VCR and TV.
i_	Be sure	that the	TV is set to the VCR Output
	Channel	(channel	3 or 4).

i_ Aim the remote control at the sensor on the front panel of the VCR.

i_ Press "MENU" button on the remote control. The "MENU", as illustrated, will appear on the TV screen.

i} Press "1" button to set clock. The display prompts you to set the hour.

NOTE: If direct VIDEO/AUDIO connection is made between the VCR and the -rv, set the TV'ssource selector to VIDEO.

PUSH SELECTION NUMBER

1 CLOCK SET

2 NORMAL PROGRAM

3DALLY PROGRAM

4WEEKLY PROGRAM

5PROGRAM REVIEW

6SET UP

TO END PUSH MENU

Main MENU (English)

CLOCK SET

TIME -_J -'/:....

/1\

TO END PUSH MENU

-21 -