PROGRAM TIMER SETTING (You must use the Remote Control)
This VCR can be programmed to record up to 8 programs within a period of 1 year. For unattended recording, the timer needs to know the channels to be recorded and the times to start and to end.
_Things to know before starting
•If you try to set the program timer before setting the clock, "CLOCK SET" mode appears on the
TV screen. Set the time and date before pro- ceeding.
•The buttons for programming the timer are on the remote control.
•While you are programming the timer, the "Menu display" on the TV screen will prompt you through the procedures.
•The display contents will be switched to the "IV screen automatically if it is left on without fur- ther steps for about 3 minutes.
•Make sure batteries are installed in the remote control.
•Make sure a tape is in the VCR.
•You can correct an error in the program, any time before the last step by pressing "CLEAR" button repeatedly until the digit to be corrected flashes and then by entering the corrections.
_)Turn on the power of both VCR and TV.
OBe sure that the TV is set to the VCR Output Channel (Channel 3 or 4).
_)Aim the remote control at the receiver on the front panel of the VCR.
_1 Press "MENU" button on the remote control. The "MENU", as illustrated, will appear on the TV screen.
Pt_y
"CLEAR" Button
"MENU" Button |
| |
Number Buttons | QQ® | |
"0" through "9" | ||
®®® | ||
| ||
| ®®® | |
| OOO | |
| RE_OI1ECO_rmOL |
PUSH SELECTION NUMBER
1 CLOCK SET
2 NORMAL PROGRAM
3 DAILY PROGRAM
4 WEEKLY PROGRAM
5 PROGRAM REVIEW
6SET UP
TO END PUSH MENU
_) Make sure | that the | TV system (TV or CATV) to |
|
|
|
the desired | position | in the SET UP mode feature. | PUSH SELECTION | NUMBER | |
|
|
| > 1 | TV SYSTEM | (TV) |
|
|
| 2 AUTO CHANNEL | SET | |
|
|
| 3 | LANGUAGE SELECT |
TO END PUSH MENU
- 24 -