Goldstar R-E21M owner manual Instant Timer Recording ITR, For ITR Recording, Starting ITR NOW

Page 30

INSTANT TIMER RECORDING (ITR)

Instant Timer Recording allows you to make simplified timer recording without using the program timer.

FOR ITR RECORDING

1.Be sure that the clock is set to the correct time. (Refer to "CLOCK SETI'ING".)

2.Insert the cassette (one with the erase prevention tab intact) into the cassette loading door.

3.Press "INPUT SELECT" button so as to select Channel Number Display.

4.Press "CHANNEL" Select Buttons to select the channel to be recorded.

5.Press "TAPE SPEED" button to select the desired speed.

STARTING ITR NOW

To start recording immediately and to set the recording length (in 30-minute increments).

1.First perform Steps 1 through 5 of "FOR ITR RECORDING".

2.After recording has started, press REC/ITR

button once again to indicate the recording time on the screen.

INSTANT TIMER RECORD

p,.AY

"REC/ITR* Button

O®®

®®®

o,®®

RECALLING THE ITR SE'n'ING

Press the REC/ITR button, and the recalled ITR setting will be displayed on the screen. The recalled ITR setting will automatically return to the current position in 5 seconds.

NOTE: To recall the recording time, press the REC/ITR button only once. If you press this button twice or more, the recording time will be changed.

CH O2

TAPE SPEED: SP

START

01:09PM

LENGTH

0:00

,Ira

 

For each press, the time changes as in the chart below.

EXAMPLE: CURRENT TIME 01:09 PM

REC/ITR Button

LENGTH display

 

 

(ITR STOP TIME)

1 press

0:00

2

presses

0:30

3

presses

1:00

17 presses

8:00

18 presses

8:30

19

presses

9:00

20

presses

0:00

TO CANCEL THE ITR SETTING

1.Press the "POWER" ON/OFF button or STOP button to stop the VCR during ITR operation.

NOTES:

The "TIMER" and "REC" indicators will light on the VCR display during Instant Timer Recording.

eThe recording time can be extended any time during "ITR" by pressing "REC/ITR" button.

Press "REC/ITR" button to reset the length of recording in 30 minute increments for up to 9 hours and then to "END" (the recording will continue until the end of the tape).

To change the "ITR" program, the previous infor- mation must be cleared first.

If "ITR" and the program timer recording overlap, the former will override the latter.

During Instant Timer Recording, you can not change the Channel of the VCR.

If you want to view another channel, press the VCR/TV button to TV mode, and then select the channel to be viewed with the TV's channel selector.

- 29 -

Image 30
Contents VCR DEW Moisture Condensation Table of Contents Important Safety Instructions National Electrical Installation CatvVCR Antennancr ConnectionsAntenna with Separate VHF-UHF Leads Hm Twin-lead Flat CableVCR/TV Connections Cable Antenna Catv Connections CouplerTo OUT to TV CH3 or VCR To in from ANT On Screen DisplayOn Screen Function Displays Catv AVAuto Channel SET Display SET UP Menu DisplayTV System Display Language Select DisplayAuto Channel Setting On the Remote ControlTo END Push Menu To ADD or Erase Channels from To ADD a ChannelsSpecial Note HOW to Install the Batteries in the Remote ControlSET Your Television to the VCR Channel OtesMaking a Sample Recording Input Select ButtonIdentification and Operation of Controls If you select AN, AV indicator appears on the screenChannel Select Switch AudioRemote Control Receiver Power ON/OFF BuronIndicators of VCR Display Signals from the wireless remote control STOP/EJECT BUI-rONREW Rewind Visual Search Reverse Search FF Fast Forward Visual Search Forward SearchPAUSE/STILL Bution Power ON/OFF Button Remote ControlSignal Transmission Window TRACKING/CHANNEL Select ButtonsMing OSD On Screen Display Function BUFrONS Menu BUrFONNumber Butfons 0 Through Viss BUFrONAudionideo AV Video Cassette Indicator 120 160Input Select Button IU/AV Tuner TU VCR/TV SelectorClock SET OGOMain Menu English Time -JClock Setting Notes TimeRecording While YOU are Away QQQProgram Timer Setting You must use the Remote Control Clear Button Menu Button Number Buttons ThroughNormal Program Select Source Input Normalprogram PROGRAM1 To END Push MenuNormal Program Program 1 X tChecking the Timer Program Erasing a Timer Program Program PriorityFor ITR Recording Instant Timer Recording ITRTo Cancel the ITR Setting Starting ITR NOWEditing a Recording Recording ONE ProgramWhile Viewing Another Tape Speed ButtonREW Button VHS Index Search System VissMarking MarkVisual Search F-SEARCH and R-SEARCH Picture SearchSP Recording x EP recording x LP recording x PAUSE/STILL PAUSE/STILLAuto Playback Function Erase Prevention TabButton =DISPLAY Button Using the Counter Memory FeatureReal Time Counter Clock Real Time CounterAUTO-REWIND Auto Memory Power SHUT-OFFVideo Head Cleaning Playback with TV Equipped with VIRErase Preventlon Tab Operating HintsVCR to VCR Dubbing ConnectionsRecording TV Program OFF the AIR TroubleshootingInserting or Removing the Cassette Playback of PRE-RECORDED CassetteHOW to Order Repair Parts Routine MaintenanceSears Service Symptom Check Point & CorrectionSpecifications FeaturesIPress to TV Press 000 Olnsert a cassetteREC/ITR Presses 030 100 Select the desired speed 830 900 000 ButtonPage Warranty