Goldstar R-E21M owner manual Recording While YOU are Away, Qqq

Page 24

RECORDING WHILE YOU ARE AWAY

Be sure that the clock is set to the correct time. (Refer to "CLOCK SEI-IING" on page 21 .)

1.insert the cassette.

NOTE: Before starting check that the erase prevention tab is not missing. If it is removed, recording will not start.

2.Set the program timer for the; Menu program Number Program Mode

Input Select Channel

Tape Speed Record-starting time Record-stopping time

Date (on which to recording is to be made)

(Refer to "PROGRAM TIMER SETTING" on pages 24 through 28.)

"INPUT SELECT" Button

_Y

UENU _ D_tAy

(_ (_ (_

:QQQ:

Number Buttons

®®,

L ....

000

REMOTE COWmOL

3.Press "POWER" ON/OFF button to OFF. The TIMER indicator will appear on the VCR display.

NOTES:

1.If the erase prevention tab is removed, the cas-

sette is ejected automatically and the "TAPE-IN"indicator will flash. Stick a piece of cel- lophane tape over the erase prevention hole on the cassette to enable recording.

2.The "TAPE-IN"indicator will flash if a cassette is not inserted.

"TIMER" Indicator

"POWER" ON/OFF Button

4.The recording will start and the " TIMER " and the

"REC" indicators will light at the time you have programmed.

NOTES:

1.When the TIMER indicator is on, your VCR can not be operated manually (except POWER but- ton).

2.If the tape runs out (if the end of the tape is reached) during timer recording, the mode will change automatically to STOP, REWIND and EJECT in this order. At that point, power will cease to be supplied to prevent the recorded tape from being overlapped.

3.If the "TIMER" indicator goes off it indicates that there has been a power interruption and the "[]me and Programming need to be reset.

4.To stop the VCR during "l]mer Recording, press "POWER" ON/OFF button OFF.

- 23 -

Image 24
Contents VCR DEW Moisture Condensation Table of Contents Important Safety Instructions National Electrical Installation CatvAntennancr Connections Antenna with Separate VHF-UHF LeadsVCR Hm Twin-lead Flat CableVCR/TV Connections Cable Antenna Catv Connections CouplerTo OUT to TV CH3 or On Screen Display On Screen Function DisplaysVCR To in from ANT Catv AVSET UP Menu Display TV System DisplayAuto Channel SET Display Language Select DisplayAuto Channel Setting On the Remote ControlTo END Push Menu To ADD or Erase Channels from To ADD a ChannelsHOW to Install the Batteries in the Remote Control SET Your Television to the VCR ChannelSpecial Note OtesMaking a Sample Recording Input Select ButtonIf you select AN, AV indicator appears on the screen Channel Select SwitchIdentification and Operation of Controls AudioPower ON/OFF Buron Indicators of VCR DisplayRemote Control Receiver Signals from the wireless remote control STOP/EJECT BUI-rONREW Rewind Visual Search Reverse Search FF Fast Forward Visual Search Forward SearchPAUSE/STILL Bution Remote Control Signal Transmission WindowPower ON/OFF Button TRACKING/CHANNEL Select ButtonsOSD On Screen Display Function BUFrONS Menu BUrFON Number Butfons 0 ThroughMing Viss BUFrONVideo Cassette Indicator 120 160 Input Select Button IU/AV Tuner TUAudionideo AV VCR/TV SelectorOGO Main Menu EnglishClock SET Time -JClock Setting Notes TimeRecording While YOU are Away QQQProgram Timer Setting You must use the Remote Control Clear Button Menu Button Number Buttons ThroughNormal Program Select Source Input Normalprogram PROGRAM1 To END Push MenuNormal Program Program 1 X tChecking the Timer Program Erasing a Timer Program Program PriorityInstant Timer Recording ITR To Cancel the ITR SettingFor ITR Recording Starting ITR NOWRecording ONE Program While Viewing AnotherEditing a Recording Tape Speed ButtonVHS Index Search System Viss MarkingREW Button MarkVisual Search F-SEARCH and R-SEARCH Picture SearchSP Recording x EP recording x LP recording x PAUSE/STILL Auto Playback FunctionPAUSE/STILL Erase Prevention TabUsing the Counter Memory Feature Real Time CounterButton =DISPLAY Button Clock Real Time CounterAuto Memory Power SHUT-OFF Video Head CleaningAUTO-REWIND Playback with TV Equipped with VIROperating Hints VCR to VCR DubbingErase Preventlon Tab ConnectionsTroubleshooting Inserting or Removing the CassetteRecording TV Program OFF the AIR Playback of PRE-RECORDED CassetteRoutine Maintenance Sears ServiceHOW to Order Repair Parts Symptom Check Point & CorrectionSpecifications FeaturesIPress to TV Olnsert a cassette REC/ITRPress 000 Presses 030 100 Select the desired speed 830 900 000 ButtonPage Warranty