Goldstar R-E21M owner manual Making a Sample Recording, Input Select Button

Page 15

MAKING A SAMPLE RECORDING

1.Insert the Cassette so the transparent window is up and the arrow toward the Cassette Loading Door until the VCR mechanism starts to pull the

cassette into the opening.

NOTES:

1.When the cassette is loaded, the power is turned on automatically.

2.Be sure to check that the erase prevention tab is not missing. If it is removed, the VCR goes into playback mode automatically.

5.Now, press "REC/ITR" button once, on the VCR or on the remote control. The " REC" indicator

will light on the VCR display panel and you are now recording the program you see on your TV screen.

"REC" Indicator

2.Turn on TV and tune to the VCR Channel (Channel 3 or 4).

3.Press "INPUT SELECT" button on the remote control so as to select Channel Number Display.

4.Press Channel Select button (v or A) on the remote control to select the channel to be recorded.

"INPUT SELECT" Button

Channel Select Buttons

O®®

"REC/ITR" Button

6.Record for a few minutes. Press "STOP" button on the VCR or on the remote control and then "REW" button. The tape will be rewound to the beginning.

7.Press "PLAY" button on the VCR or remote

control. The program you just recorded will be shown.

8.After playing, press "STOP" button on the VCR or on the remote control.

"PLAY" Button

"REW" Button

"STOP" Button

_.u CLam O_Y

@@@

@@®

@®®

000

I_EMOTEcO_rTROL

,...____.J

I"rr

i"rlr r rl

Ir

ii

14-

Image 15

Contents VCR DEW Moisture Condensation Table of Contents Important Safety Instructions National Electrical Catv InstallationHm Twin-lead Flat Cable Antennancr ConnectionsAntenna with Separate VHF-UHF Leads VCRVCR/TV Connections Cable Antenna Catv Connections CouplerTo OUT to TV CH3 or Catv AV On Screen DisplayOn Screen Function Displays VCR To in from ANTLanguage Select Display SET UP Menu DisplayTV System Display Auto Channel SET DisplayAuto Channel Setting On the Remote ControlTo END Push Menu To ADD a Channels To ADD or Erase Channels fromOtes HOW to Install the Batteries in the Remote ControlSET Your Television to the VCR Channel Special NoteInput Select Button Making a Sample RecordingAudio If you select AN, AV indicator appears on the screenChannel Select Switch Identification and Operation of ControlsSignals from the wireless remote control STOP/EJECT BUI-rON Power ON/OFF BuronIndicators of VCR Display Remote Control ReceiverREW Rewind Visual Search Reverse Search FF Fast Forward Visual Search Forward SearchPAUSE/STILL Bution TRACKING/CHANNEL Select Buttons Remote ControlSignal Transmission Window Power ON/OFF ButtonViss BUFrON OSD On Screen Display Function BUFrONS Menu BUrFONNumber Butfons 0 Through MingVCR/TV Selector Video Cassette Indicator 120 160Input Select Button IU/AV Tuner TU Audionideo AVTime -J OGOMain Menu English Clock SETTime Clock Setting NotesQQQ Recording While YOU are AwayClear Button Menu Button Number Buttons Through Program Timer Setting You must use the Remote ControlNormalprogram PROGRAM1 To END Push Menu Normal Program Select Source InputProgram 1 X t Normal ProgramChecking the Timer Program Program Priority Erasing a Timer ProgramStarting ITR NOW Instant Timer Recording ITRTo Cancel the ITR Setting For ITR RecordingTape Speed Button Recording ONE ProgramWhile Viewing Another Editing a RecordingMark VHS Index Search System VissMarking REW ButtonVisual Search F-SEARCH and R-SEARCH Picture SearchSP Recording x EP recording x LP recording x Erase Prevention Tab PAUSE/STILLAuto Playback Function PAUSE/STILLClock Real Time Counter Using the Counter Memory FeatureReal Time Counter Button =DISPLAY ButtonPlayback with TV Equipped with VIR Auto Memory Power SHUT-OFFVideo Head Cleaning AUTO-REWINDConnections Operating HintsVCR to VCR Dubbing Erase Preventlon TabPlayback of PRE-RECORDED Cassette TroubleshootingInserting or Removing the Cassette Recording TV Program OFF the AIRSymptom Check Point & Correction Routine MaintenanceSears Service HOW to Order Repair PartsFeatures SpecificationsIPress to TV Presses 030 100 Select the desired speed 830 900 000 Button Olnsert a cassetteREC/ITR Press 000Page Warranty