USING THE COUNTER MEMORY FEATURE
The tape counter on this VCR indicates the tape travel and playback.
The memory feature allows you to return to a specific spot on the cassette after recording or playing.
The memory works with the Counter to return to a particular spot on the cassette. The memory is designed to stop when the counter reaches "0:00:00" during rewind (REW).
This feature is especially helpful when editing a recording.
1.Press "CLOCK/COUNT" button repeatedly for counter memory mode. The indicator "M" appears.
2.Press "DISPLAY" button twice for counter display on the screen if necessary.
3.Start playing or recording a tape.
4.At the point you want to start, press "RESET" button ta reset the counter to "M0:00:00".
5.Continue to play or record.
6.Press "STOP" button.
7.Press "REW" button. The tape will be rewound to
the preselected point approximately at "M0:00:00".
NOTES:
1.The linear time counter does not operate for non- recorded portions.
2.The tape counter will be automatically reset "0:00:00" when the tape is loaded.
3.If a tape is rewound beyond "0:00:00", the counter will show a negative indication.
4.The tape starts moving from "0:00:00" and counter indicates amount elapsed time.
time in hours, minutes, and seconds during recording
,,i
"REW"
Button _[_
"STOP"
Button
=DISPLAY" Button
QQ®
"RESET" Button
"CLOCK/COUNT" Button
REAL TIME COUNTER
The real time counter can be calculated by pressing "CLOCK/COUNT" button. Each time the "CLOCK/COUNT" button is pressed, the display switches as follows.
CLOCK | REAL TIME |
|
|
| COUNTER |
|
|
02:15 PM |
| MO:O0:O0 |
|
|
| I I I |
|
Hour indication __ | I | Minute | I |
Hour | Second | ||
Minute indication | indication | indication | indication |
| - 34 - |
|
|