Goldstar R-E21M owner manual Input Select Button IU/AV Tuner TU, Audionideo AV, VCR/TV Selector

Page 21

TRACKING

PINY

REW__FF/f_)

MENU CLEAR DISPLAY

@®®

®®®

@®®

CLOCK/

VISS COUNT RESET

© © ©

ADD/f_ h

ERASEVJ

REMOTE CONTROL

j

INPUT SELECT BUTTON ('I'U/AV)

TUNER: (TU)

To record signals coming from the built-in tuner (Video and Audio),

AUDIONIDEO: (AV)

To record signals coming from the VIDEO IN and AUDIO IN terminals.

NOTE: This VCR can be used as an Audio deck when Input Select button is in AV position.

"VCR/TV" SELECTOR

Selects the program for viewing on your TV. The "VCR" position (the "VCR" indicator is on) supplies a signal to your TV on Channel 3 or 4 depending on the RF Channel Select Switch setting. With the PLAY button pressed, the recorded tape program is supplied to the TV. With the RECORD mode on the VCR, the TV will display the program as it is being recorded. The rv position (the "VCR" indicator is off) is used for regular TV operation when the VCR is not being used.

This position also allows you to record one channel while viewing another.

NOTES:

•When the power is turned on, the VCR/TV

selector is switched to the VCR mode

automatically.

eThe VCR/TV selector is switched to the VCR mode when "PLAY" button is pressed.

"TAPE SPEED" BUTTON

Changes tape speed in the recording mode. Record and playback time is as follows:

"TAPE SPEED"		Video Cassette
Indicator	T-60		T-120		1"-160
SP	60	min.	120 min.		160 min.
LP	120	min.	240	min.	320	min.
EP	180	min.	360	min.	480	min.

In the playback mode, tape speed is automatically selected to match the recording speed.

- 20 -

Image 21

Contents VCR DEW Moisture Condensation Table of Contents Important Safety Instructions National Electrical Catv InstallationAntenna with Separate VHF-UHF Leads Antennancr ConnectionsVCR Hm Twin-lead Flat CableVCR/TV Connections Cable Antenna Catv Connections CouplerTo OUT to TV CH3 or On Screen Function Displays On Screen DisplayVCR To in from ANT Catv AVTV System Display SET UP Menu DisplayAuto Channel SET Display Language Select DisplayAuto Channel Setting On the Remote ControlTo END Push Menu To ADD a Channels To ADD or Erase Channels fromSET Your Television to the VCR Channel HOW to Install the Batteries in the Remote ControlSpecial Note OtesInput Select Button Making a Sample RecordingChannel Select Switch If you select AN, AV indicator appears on the screenIdentification and Operation of Controls AudioIndicators of VCR Display Power ON/OFF BuronRemote Control Receiver Signals from the wireless remote control STOP/EJECT BUI-rONREW Rewind Visual Search Reverse Search FF Fast Forward Visual Search Forward SearchPAUSE/STILL Bution Signal Transmission Window Remote ControlPower ON/OFF Button TRACKING/CHANNEL Select ButtonsNumber Butfons 0 Through OSD On Screen Display Function BUFrONS Menu BUrFONMing Viss BUFrONInput Select Button IU/AV Tuner TU Video Cassette Indicator 120 160Audionideo AV VCR/TV SelectorMain Menu English OGOClock SET Time -JTime Clock Setting NotesQQQ Recording While YOU are AwayClear Button Menu Button Number Buttons Through Program Timer Setting You must use the Remote ControlNormalprogram PROGRAM1 To END Push Menu Normal Program Select Source InputProgram 1 X t Normal ProgramChecking the Timer Program Program Priority Erasing a Timer ProgramTo Cancel the ITR Setting Instant Timer Recording ITRFor ITR Recording Starting ITR NOWWhile Viewing Another Recording ONE ProgramEditing a Recording Tape Speed ButtonMarking VHS Index Search System VissREW Button MarkVisual Search F-SEARCH and R-SEARCH Picture SearchSP Recording x EP recording x LP recording x Auto Playback Function PAUSE/STILLPAUSE/STILL Erase Prevention TabReal Time Counter Using the Counter Memory FeatureButton =DISPLAY Button Clock Real Time CounterVideo Head Cleaning Auto Memory Power SHUT-OFFAUTO-REWIND Playback with TV Equipped with VIRVCR to VCR Dubbing Operating HintsErase Preventlon Tab ConnectionsInserting or Removing the Cassette TroubleshootingRecording TV Program OFF the AIR Playback of PRE-RECORDED CassetteSears Service Routine MaintenanceHOW to Order Repair Parts Symptom Check Point & CorrectionFeatures SpecificationsIPress to TV REC/ITR Olnsert a cassettePress 000 Presses 030 100 Select the desired speed 830 900 000 ButtonPage Warranty