JVC LPT0320-001B Looking For Scene You Want, Activate Index Search, Skip Over Unwanted, Sections

36ADVANCEDOPERATIONS(cont.)

Looking For

The Scene

You Want

Index Search

Your recorder automatically marks

index codes at the beginning of£ 2 each recording. Additional index

codes can be added manually during playback. (See Below.) This function gives you quick access to any one of 9 index codes in either direction.

NOTE:

Before starting, make sure the recorder is in the Stop mode.

ACTIVATE INDEX SEARCH

1 Press @ or # (ª or £). “ª 1” or “£ 1” is displayed on screen and search begins in the corre- sponding direction.

1

2

1

2

– –:– –

1 2 3

4 5 6

7 8 9

0

30 SEC

3

4

4

MENU

3OK

●To access index codes 2 through 9, press @ or # repeatedly until the correct index number is dis- played.

Ex.: To locate the beginning of B from the current position, press @ twice.

To locate the beginning of D from the current position, press # once.

Current position

A	B C		D	E	F
–2		–1	1	2	3
		￿

Index number

●When the specified index code is located, playback begins automatically.

PLAY

RECORD

Manual Index Mark/Erase

To mark an index code...

...during playback press INDEX MARK on the recorder.

●The recorder will mark an index code at that location.

●If "O.S.D." is set to "ON" (☞ pg. 59), "MARK" blinks on the screen while an index code is being marked.

To erase an index code...

...during playback or still press INDEX ERASE on the recorder.

●The recorder will fast-forward to the nearest index code and erase it. Playback continues after the index code is erased.

●If "O.S.D." is set to "ON" (☞ pg. 59), "ERASE" blinks on the screen while an index code is being erased.

Skip Search

	SKIP OVER UNWANTED
1	SECTIONS
	Press 30 SEC 1 to 4 times during playback. Each press
	initiates a 30-second period of fast-motion playback.
	Normal playback resumes automatically.

NOTE:

NOTES:

●Video Navigation (☞ pg. 24) may not work properly when an index code (VISS signal) is marked or erased manually near a start point of recorded programme.

●During timer recording, you cannot mark an index code manually.

To return to normal playback during a Skip Search, press PLAY.