JVC HR-S9700EK, LPT0320-001B setup guide Recording According To Tape Type, Select S-VHS Mode

Page 37

Recording

According To

Tape Type

Turn on the TV and select the VIDEO channel (or AV mode).

Super VHS ET (S-VHS ET)

Recording on VHS tapes with S-VHS quality

This function allows you to record in SP mode on VHS tapes with S-VHS picture quality. Tapes recorded using this function can be played back on a recorder equipped with the S-VHS ET function.

You can activate this function only before you start recording on a VHS tape.

Before recording, make sure that "B.E.S.T." is set to "ON". (pg. 38)

1

ENGAGE S-VHS ET MODE

Press S-VHS ET on the recorder's front panel. The S-VHS

ET indicator on the recorder's front panel lights up.

 

The S-VHS indicator lights up on the front display panel.

 

To disengage the S-VHS ET mode, press S-VHS ET.

 

The S-VHS ET indicator goes off.

START RECORDING

2 Press and hold RECORD and press PLAY on the remote control, or press RECORD on the recorder.

NOTES:

Use of high grade tapes is essential for S-VHS ET record- ings. On some tapes, picture quality will not improve even if the S-VHS ET function is used. Check the record- ing quality before you start important recordings.

You cannot activate the S-VHS ET function ...

... while recording is in progress.

... while timer-recording or Instant Timer Recording (pg. 17) is in progress.

... while B.E.S.T. (pg. 38) is in progress.

S-VHS ET does not work ...

... with S-VHS tapes.

... with recordings in LP/EP mode.

To keep the highest quality recording and playback pictures over a long period of time, S-VHS recording on S-VHS tapes is recommended.

You can play back S-VHS ET recordings on most S-VHS recorders and on VHS recorders equipped with SQPB (S-VHS QUASI PLAYBACK) function. (Notice: some recorders are not compatible with this function.)

On some tapes noise may appear when playing back a tape recorded with this function. (If playback picture becomes blurred or interrupted, use a cleaning cassette.)

In the high-speed search, still, slow-motion or frame-by-frame playback modes (pg. 15), noise may appear. If these modes are used frequently on a tape recorded with the S-VHS ET function, the tape may be damaged and the picture may be deteriorated.

37

Super VHS (S-VHS),

S-VHS ET and VHS

Your recorder can record in S-VHS, S-VHS ET or VHS.

To record in S-VHS:

Perform the steps 1 4 below to set "S-VHS" to "ON".

Then, insert a cassette marked "S-VHS", the S-VHS indicator will light on the display panel.

The S-VHS recording mode will be selected.

To record in S-VHS ET on a VHS cassette:

See "Super VHS ET (S-VHS ET)" in the left column.

To record in VHS:

Insert a cassette marked "VHS".

If the S-VHS ET indicator on the recorder is lit and the S-VHS ET mode is activated, press S-VHS ET. The indicator goes off.

The VHS recording mode will be automatically selected regardless of the S-VHS mode setting.

To record in VHS on an S-VHS cassette:

Insert the cassette marked "S-VHS", the S-VHS indicator will light on the display panel.

Then, perform the steps 1 4 below to set the "S-VHS" to "OFF"; the S-VHS indicator will go out.

The VHS recording mode will be selected.

 

 

 

ACCESS MAIN MENU

 

 

 

 

1

 

SCREEN

 

 

 

 

 

 

 

 

 

Press MENU.

 

 

 

 

 

 

 

 

2

 

ACCESS MODE SET SCREEN

 

 

Move the highlight bar

MAIN MENU

 

 

 

 

 

(pointer) to "MODE SET"

 

 

 

 

 

 

 

MODE SET

 

 

 

 

 

 

by pressing , then press

 

 

 

 

 

 

AUTO CH SET

 

 

 

 

 

OK or #.

 

 

MANUAL CH SET

 

 

 

 

 

 

 

 

 

 

OUTPUT/INPUT SET

 

 

 

 

 

 

 

 

 

 

INITIAL SET

 

 

 

 

 

 

 

 

 

 

REC LEVEL CTLT

 

 

 

 

 

 

 

 

 

 

R.A.EDIT

 

 

 

 

 

 

 

 

 

 

VIDEO NAVIGATION

 

 

 

 

 

 

 

 

 

 

[] =

 

 

 

 

 

 

 

 

 

 

 

[MENU] : EXIT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3

 

SELECT S-VHS MODE

 

 

 

 

 

Move the highlight (pointer) to "S-VHS" by pressing

 

 

, then press OK or #to select "ON" or "OFF".

 

 

 

 

 

 

MODE SET

 

 

PREVIOUS PAGE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

B. E. S. T.

ON

 

POWER SAVE

OFF

 

 

 

 

PICTURE CONTROL

AUTO

 

VIDEO STABILIZER

OFF

 

 

 

 

AUTO TIMER

OFF

S-VHS

ON

 

 

 

 

 

O. S. D.

ON

TIME SCAN AUDIO

ON

 

 

 

 

 

DIRECT REC

ON

 

 

 

 

 

 

 

 

 

AUTO SP=LP TIMER

OFF

 

 

 

 

 

 

 

 

 

DIGITAL 3R

ON

 

 

 

 

 

 

 

 

 

NEXT PAGE

 

 

 

 

 

 

 

 

 

[] =

 

 

[] =

 

 

 

 

 

 

 

 

[MENU] : EXIT

 

 

[MENU] : EXIT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

RETURN TO NORMAL

 

 

 

 

4

 

SCREEN

 

 

 

 

 

 

 

 

 

Press MENU.

 

 

 

 

 

 

 

NOTE:

When playing back a tape that has been recorded in S-VHS or S-VHS ET, the S-VHS indicator lights on the display panel regardless of the "S-VHS" mode setting.

Image 37
Contents HR-S9700EK Connection to the mains supply in the United Kingdom Safety PrecautionsDo not place the recorder Moisture CondensationSome Dos And Donts On The Safe Use Of Equipment Quick SET UP Guide Back of TV Connect Video Recorder to TVBack of Recorder Video Connection Mains outlet Mains Power CordWith the AV or S-VIDEO connection Before performing the following procedure, make sure thatTion pg and the TV is turned on, Go to item10 or If -- appears on the display panel, refer Remote control while downloading isLink screen will appear. Then the Guide Program number setIf both auto channel set and auto clock set have failed If auto channel set has succeeded but auto clock set has notAccess Mode SET Screen Access Main Menu ScreenLink Functions Turn on the RecorderSatellite Receiver Control Setting Enter Satellite RECEIVER’S Brand Select Satellite RECEIVER’S Channel for TestingCheck Result of Test Satellite Tuner Brand CodeLoad a Cassette PlaybackFind Programme Start Point Start PlaybackStill Picture/Frame-By-Frame Playback Slow MotionHigh-Speed Turbo Search Variable-Speed SearchRecording Reset Counter Select Preset to WatchEngage ITR Mode SET Counter DisplayAccess Video PLUS+ Screen Video Plus+ Timer ProgrammingAccess Video PLUS+ Program Screen Enter Pluscode NumberPDC Recording Timer WarningEnter Programme Express Timer ProgrammingStart Time TimeTimer Mode SET PDC ModeSET Tape Speed Return to NormalCheck, Cancel And Replace Programmes Cancel or Change Programme Setting When programmes overlap each otherConfirm Overlapping Programmes ModifyNavigation Return to Normal Screen Check MemoryTurn OFF Navigation Turn Off NavigationTitle Editing Access Find Blank Space ScreenSelect Tape Number Load a CassetteEnter Character Access Video Navigation ScreenEdit Tape Title Select Tape NumberSelect Category Select ProgrammeEdit Programme Title Category Data Delete ProgrammeDelete Tape Data Delete Programme DataAccess Tape NO. Screen Access Find Title ScreenAccess Video Finding TitleSelect Programme Access Category Screen Access Date ScreenSelect Programme Load a Cassette Sorting By DateAdjust Tracking Playback Picture AdjustmentOverride Automatic Tracking ManuallyMode SET ModeDigital 3R Video StabilizerAdjust Audio Access REC LevelSelecting Sound You Want Control ScreenSoundtrack Selection Receiving Nicam Stereo And Bilingual ProgrammesDuring Playback Type of Broadcast On-screen Display Being ReceivedActivate Index Search Looking For Scene You WantSkip Over Unwanted SectionsRecording According To Tape Type Select S-VHS ModeSuper VHS S-VHS VHS ET and VHS Playback/ Recording According To Tape Charac- teristics Select B.E.S.T. ModeS.T. Picture System Recording Start PlaybackPlayback During B.E.S.TTimeScan Audio signal during TimeScanSearch Variable-Speed Search/ Reverse PlayTimeScan Audio TimeScanSpeed SP Speed LP Speed EP Audio output Forward Search Play Slow-Motion StillAutomatic Satellite Programme Recording Connector TV Aerial cable Audio in connectorSatellite Receiver Unit AerialSelect L-2 Select Mode Access Main Menu ScreenREC Mode ScreenRemove Power Supply Remote Control FunctionsSET Remote Control Code RE-SUPPLY PowerTV Multi-Brand Remote Control Control Your TV Using Additional ButtonsSET TV Brand Code Operate TVSET Satellite Receiver Satellite Receiver Multi- Brand Remote ControlBrand Code Operate Satellite ReceiverAccess Mode SET Access Main MenuControl SET Mode Minimizing Picture Degradation While EditingEdit From Camcorder Synchro Editing Synchro Edit connector Lanc Cable not providedRepeat steps 4 6 as necessary SET Edit Mode Input ModeEdit To Or From Another Video Recorder SET Recording DECK’SRecorder Player TV Receiver Player Your recorder RecorderSELECT/INPUT Setting OUTPUT/INPUT SettingLocate Start Point SET Input ModeEngage Audio Dubbing Start DubbingInsert Editing Reset the CounterLocate END Point Start Editing Engage Insert EditingEND Insert Editing DUBPrepare for Editing Random As- semble EditingLoad Source Cassette Press R.A.EDITLocate EDIT-OUT Point Locate EDIT-IN PointStart R.A.EDIT END R.A.EDITAccess Initial SET Screen Terminal JLIPJoint Level Interface Protocol ConnectorAccess Jlip ID NO. SET Screen Information On J TerminalOther Functions ENABLE/DISABLEON-SCREEN Display On-Screen DisplayPower Save Mode Select Power Save ModePress %Þ to move the highlight bar pointer to Auto Timer Access Mode SET ScreenAuto SP→LP Timer Next Function MemoryStop Playback Engage RECORD-PAUSE ModeResume Recording Speaker Television Connection To Stereo SystemExit Video Channel SET Mode Access Video Channel SET ModeVideo Channel Set SET Video ChannelInserted in the recorder With RF ConnectionConnected TV is turned on Perform Auto Channel SET Tuner SetAuto Channel Set Pointer to Auto CHView Confirmation Screen Input Channel Storing Channels ManuallyEnter NEW Channel Information Close Confirmation ScreenChange Station Preset Position When Receiving a Scrambled BroadcastFine-Tuning Channels Already Stored Delete a ChannelEnter NEW Character Station Name TV Station And ID ListTV Station Channel Number Guide Clock Set Number Video Plus+ System SetupGuide Program Number Set Ä remain lit on the display panel. Is there Problem? Questions And AnswersWhat happens if the tape runs out during recording? Troubleshooting Won’t stop blinking Record Safety tab removed Timer RecordingFront View Index3 4 5 6 @ # $ Inside View of Front PanelRear View VCR Display PanelTV Muting Button mutes sound Remote ControlFast Forward FF Button same as button on Remote Control LCDMaximum recording time Mm x 106 mm x 352 mmDA4 Double Azimuth helical