JVC HR-S9700EK, LPT0320-001B setup guide Clock Set

Clock Set

Turn on the TV and select the VIDEO channel (or AV mode).

73

IMPORTANT

If you performed Auto Set Up (☞ pg. 8), Preset Download (☞ pg. 9) or Auto Channel Set (☞ pg. 66), without ever having set the clock previously, the recorder's built-in clock is also set automatically.

Perform the following steps only if —

—Auto Clock Set has not been performed correctly by Auto Set Up, Preset Download or Auto Channel Set.

or

—the recorder's memory backup has expired.

or

—you want to change Just Clock setting (☞ "Just Clock" in the left column).

1

2

1

– –:– –

1 2 3

4 5 6

7 8 9

0

3

4

4

MENU

3OK

1	TURN THE RECORDER ON
	Press	.
2	ACCESS MAIN MENU SCREEN
	Press MENU.
	ACCESS INITIAL SET SCREEN
	Move the highlight bar (pointer) to "INITIAL SET" by
3 pressing %Þ, then press OK or #.

2

Just Clock

The Just Clock function provides accurate time keeping through automatic adjustments at regular intervals, by reading data from a PDC signal.

The Just Clock option can be set "ON" or "OFF" at the Clock Set screen (the default setting is "ON"). Press OK until the Just Clock setting begins blinking, then press %Þ to change the setting.

IMPORTANT: If you turn the Just Clock function off, the accuracy of your recorder’s built-in clock may be im- paired, which could adversely affect timer recording.

NOTES:

●Just Clock (when set to "ON") adjusts the recorder's built-in clock every hour, except for 23:00, 0:00, 1:00 and 2:00.

●Just Clock is not effective when . . .

–the recorder’s power is on.

–the recorder is in the Timer mode.

–a difference of more than 3 minutes exists between the built-in clock’s time and the actual time.

–the recorder is in the Auto Satellite Prog Rec mode. (☞ pg. 42)

–"L-2 SELECT" is set to "SAT". (☞ pg. 52)

●If Just Clock is set to "ON", the recorder’s clock is automati- cally adjusted at the start/end of Summer Time.

●Just Clock may not function properly in poor reception conditions.

4	ACCESS CLOCK SET SCREEN
	Move the highlight bar (pointer) to "CLOCK SET" by
	pressing %Þ, then press OK or #. The Clock Set screen
	appears.
	INITIAL SET		CLOCK SET
			TIME	DATE	YEAR
	CLOCK SET
	GUIDE PROG	SET	0: 00	01 . 01	00
	SAT CONTROL SET		JUST	CLOCK: ON
	JLIP ID NO. SET
			TV PR.	:	1
			[5°] =
	[5°] =
	[MENU] : EXIT		[MENU] : EXIT
5	SET DATE AND TIME
	Press %Þ to set the time, then press OK or #. The "date"
	display begins blinking. Repeat the same procedure to
	set the date and year.
	● When you set the time,		press and hold %Þ to
	change the time by 30 minutes.
	● When you set the date,		press and hold %Þ to
	change the date by 15 days.
6	SET JUST CLOCK
	The default setting is “ON”. Set as desired by pressing
	%Þ, then press OK or #.
	● For the Just clock function, ☞ "Just Clock" on the left.
	● If you set to “OFF”, you can disregard the next step as
	you won’t be able to receive regular clock adjustments.
	SET CLOCK DATA SOURCE PRESET
	The recorder is preset to receive clock setting and
	adjustment data from preset position 1. Press %Þ to set
	the preset position to the number representing the
7 station transmitting clock setting data (BBC1, BBC2,
	etc.), then press OK or #.
	START CLOCK OPERATION
8 Press MENU.